Subversion Repositories planix.SVN

#!/bin/rc

{

	sed '/^$/q' scsicodes

	hget http://www.t10.org/lists/asc-num.htm |

		grep '^[0-9]' |tr -d '
' |tr A-Z a-z |

		sed 's/(..)\/(..)  ..............  (.*)/\1\2 \3/'

} > nscsicodes && mv nscsicodes scsicodes

exit

0001 filemark detected

0002 end-of-partition/medium detected

0003 setmark detected

0004 beginning-of-partition/medium detected

0005 end-of-data detected

0006 i/o process terminated

0007 programmable early warning detected

0011 audio play operation in progress

0012 audio play operation paused

0013 audio play operation successfully completed

0014 audio play operation stopped due to error

0015 no current audio status to return

0016 operation in progress

0017 cleaning requested

0018 erase operation in progress

0019 locate operation in progress

001a rewind operation in progress

001b set capacity operation in progress

001c verify operation in progress

001d ata pass through information available

001e conflicting sa creation request

0100 no index/sector signal

0200 no seek complete

0300 peripheral device write fault

0301 no write current

0302 excessive write errors

0400 logical unit not ready, cause not reportable

0401 logical unit is in process of becoming ready

0402 logical unit not ready, initializing command required

0403 logical unit not ready, manual intervention required

0404 logical unit not ready, format in progress

0405 logical unit not ready, rebuild in progress

0406 logical unit not ready, recalculation in progress

0407 logical unit not ready, operation in progress

0408 logical unit not ready, long write in progress

0409 logical unit not ready, self-test in progress

040a logical unit not accessible, asymmetric access state transition

040b logical unit not accessible, target port in standby state

040c logical unit not accessible, target port in unavailable state

040d logical unit not ready, structure check required

0410 logical unit not ready, auxiliary memory not accessible

0411 logical unit not ready, notify (enable spinup) required

0412 logical unit not ready, offline

0413 logical unit not ready, sa creation in progress

0414 logical unit not ready, space allocation in progress

0415 logical unit not ready, robotics disabled

0416 logical unit not ready, configuration required

0417 logical unit not ready, calibration required

0418 logical unit not ready, a door is open

0419 logical unit not ready, operating in sequential mode

0500 logical unit does not respond to selection

0600 no reference position found

0700 multiple peripheral devices selected

0800 logical unit communication failure

0801 logical unit communication time-out

0802 logical unit communication parity error

0803 logical unit communication crc error (ultra-dma/32)

0804 unreachable copy target

0900 track following error

0901 tracking servo failure

0902 focus servo failure

0903 spindle servo failure

0904 head select fault

0a00 error log overflow

0b00 warning

0b01 warning - specified temperature exceeded

0b02 warning - enclosure degraded

0b03 warning - background self-test failed

0b04 warning - background pre-scan detected medium error

0b05 warning - background medium scan detected medium error

0b06 warning - non-volatile cache now volatile

0b07 warning - degraded power to non-volatile cache

0b08 warning - power loss expected

0c00 write error

0c01 write error - recovered with auto reallocation

0c02 write error - auto reallocation failed

0c03 write error - recommend reassignment

0c04 compression check miscompare error

0c05 data expansion occurred during compression

0c06 block not compressible

0c07 write error - recovery needed

0c08 write error - recovery failed

0c09 write error - loss of streaming

0c0a write error - padding blocks added

0c0b auxiliary memory write error

0c0c write error - unexpected unsolicited data

0c0d write error - not enough unsolicited data

0c0f defects in error window

0d00 error detected by third party temporary initiator

0d01 third party device failure

0d02 copy target device not reachable

0d03 incorrect copy target device type

0d04 copy target device data underrun

0d05 copy target device data overrun

0e00 invalid information unit

0e01 information unit too short

0e02 information unit too long

0e03 invalid field in command information unit

0f/00

1000 id crc or ecc error

1001 logical block guard check failed

1002 logical block application tag check failed

1003 logical block reference tag check failed

1100 unrecovered read error

1101 read retries exhausted

1102 error too long to correct

1103 multiple read errors

1104 unrecovered read error - auto reallocate failed

1105 l-ec uncorrectable error

1106 circ unrecovered error

1107 data re-synchronization error

1108 incomplete block read

1109 no gap found

110a miscorrected error

110b unrecovered read error - recommend reassignment

110c unrecovered read error - recommend rewrite the data

110d de-compression crc error

110e cannot decompress using declared algorithm

110f error reading upc/ean number

1110 error reading isrc number

1111 read error - loss of streaming

1112 auxiliary memory read error

1113 read error - failed retransmission request

1114 read error - lba marked bad by application client

1200 address mark not found for id field

1300 address mark not found for data field

1400 recorded entity not found

1401 record not found

1402 filemark or setmark not found

1403 end-of-data not found

1404 block sequence error

1405 record not found - recommend reassignment

1406 record not found - data auto-reallocated

1407 locate operation failure

1500 random positioning error

1501 mechanical positioning error

1502 positioning error detected by read of medium

1600 data synchronization mark error

1601 data sync error - data rewritten

1602 data sync error - recommend rewrite

1603 data sync error - data auto-reallocated

1604 data sync error - recommend reassignment

1700 recovered data with no error correction applied

1701 recovered data with retries

1702 recovered data with positive head offset

1703 recovered data with negative head offset

1704 recovered data with retries and/or circ applied

1705 recovered data using previous sector id

1706 recovered data without ecc - data auto-reallocated

1707 recovered data without ecc - recommend reassignment

1708 recovered data without ecc - recommend rewrite

1709 recovered data without ecc - data rewritten

1800 recovered data with error correction applied

1801 recovered data with error corr. & retries applied

1802 recovered data - data auto-reallocated

1803 recovered data with circ

1804 recovered data with l-ec

1805 recovered data - recommend reassignment

1806 recovered data - recommend rewrite

1807 recovered data with ecc - data rewritten

1808 recovered data with linking

1900 defect list error

1901 defect list not available

1902 defect list error in primary list

1903 defect list error in grown list

1a00 parameter list length error

1b00 synchronous data transfer error

1c00 defect list not found

1c01 primary defect list not found

1c02 grown defect list not found

1d00 miscompare during verify operation

1d01 miscompare verify of unmapped lba

1e00 recovered id with ecc correction

1f00 partial defect list transfer

2000 invalid command operation code

2001 access denied - initiator pending-enrolled

2002 access denied - no access rights

2003 access denied - invalid mgmt id key

2004 illegal command while in write capable state

2005 obsolete

2006 illegal command while in explicit address mode

2007 illegal command while in implicit address mode

2008 access denied - enrollment conflict

2009 access denied - invalid lu identifier

200a access denied - invalid proxy token

200b access denied - acl lun conflict

2100 logical block address out of range

2101 invalid element address

2102 invalid address for write

2103 invalid write crossing layer jump

2200 illegal function (use 20 00, 24 00, or 26 00)

23/00

2400 invalid field in cdb

2401 cdb decryption error

2402 obsolete

2403 obsolete

2404 security audit value frozen

2405 security working key frozen

2406 nonce not unique

2407 nonce timestamp out of range

2408 invalid xcdb

2500 logical unit not supported

2600 invalid field in parameter list

2601 parameter not supported

2602 parameter value invalid

2603 threshold parameters not supported

2604 invalid release of persistent reservation

2605 data decryption error

2606 too many target descriptors

2607 unsupported target descriptor type code

2608 too many segment descriptors

2609 unsupported segment descriptor type code

260a unexpected inexact segment

260b inline data length exceeded

260c invalid operation for copy source or destination

260d copy segment granularity violation

260e invalid parameter while port is enabled

260f invalid data-out buffer integrity check value

2610 data decryption key fail limit reached

2611 incomplete key-associated data set

2612 vendor specific key reference not found

2700 write protected

2701 hardware write protected

2702 logical unit software write protected

2703 associated write protect

2704 persistent write protect

2705 permanent write protect

2706 conditional write protect

2707 space allocation failed write protect

2800 not ready to ready change, medium may have changed

2801 import or export element accessed

2802 format-layer may have changed

2803 import/export element accessed, medium changed

2900 power on, reset, or bus device reset occurred

2901 power on occurred

2902 scsi bus reset occurred

2903 bus device reset function occurred

2904 device internal reset

2905 transceiver mode changed to single-ended

2906 transceiver mode changed to lvd

2907 i_t nexus loss occurred

2a00 parameters changed

2a01 mode parameters changed

2a02 log parameters changed

2a03 reservations preempted

2a04 reservations released

2a05 registrations preempted

2a06 asymmetric access state changed

2a07 implicit asymmetric access state transition failed

2a08 priority changed

2a09 capacity data has changed

2a0a error history i_t nexus cleared

2a0b error history snapshot released

2a0c error recovery attributes have changed

2a0d data encryption capabilities changed

2a10 timestamp changed

2a11 data encryption parameters changed by another i_t nexus

2a12 data encryption parameters changed by vendor specific event

2a13 data encryption key instance counter has changed

2a14 sa creation capabilities data has changed

2b00 copy cannot execute since host cannot disconnect

2c00 command sequence error

2c01 too many windows specified

2c02 invalid combination of windows specified

2c03 current program area is not empty

2c04 current program area is empty

2c05 illegal power condition request

2c06 persistent prevent conflict

2c07 previous busy status

2c08 previous task set full status

2c09 previous reservation conflict status

2c0a partition or collection contains user objects

2c0b not reserved

2d00 overwrite error on update in place

2e00 insufficient time for operation

2f00 commands cleared by another initiator

2f01 commands cleared by power loss notification

2f02 commands cleared by device server

3000 incompatible medium installed

3001 cannot read medium - unknown format

3002 cannot read medium - incompatible format

3003 cleaning cartridge installed

3004 cannot write medium - unknown format

3005 cannot write medium - incompatible format

3006 cannot format medium - incompatible medium

3007 cleaning failure

3008 cannot write - application code mismatch

3009 current session not fixated for append

300a cleaning request rejected

300c worm medium - overwrite attempted

300d worm medium - integrity check

3010 medium not formatted

3011 incompatible volume type

3012 incompatible volume qualifier

3013 cleaning volume expired

3100 medium format corrupted

3101 format command failed

3102 zoned formatting failed due to spare linking

3200 no defect spare location available

3201 defect list update failure

3300 tape length error

3400 enclosure failure

3500 enclosure services failure

3501 unsupported enclosure function

3502 enclosure services unavailable

3503 enclosure services transfer failure

3504 enclosure services transfer refused

3505 enclosure services checksum error

3600 ribbon, ink, or toner failure

3700 rounded parameter

3800 event status notification

3802 esn - power management class event

3804 esn - media class event

3806 esn - device busy class event

3807 thin provisioning soft threshold reached

3900 saving parameters not supported

3a00 medium not present

3a01 medium not present - tray closed

3a02 medium not present - tray open

3a03 medium not present - loadable

3a04 medium not present - medium auxiliary memory accessible

3b00 sequential positioning error

3b01 tape position error at beginning-of-medium

3b02 tape position error at end-of-medium

3b03 tape or electronic vertical forms unit not ready

3b04 slew failure

3b05 paper jam

3b06 failed to sense top-of-form

3b07 failed to sense bottom-of-form

3b08 reposition error

3b09 read past end of medium

3b0a read past beginning of medium

3b0b position past end of medium

3b0c position past beginning of medium

3b0d medium destination element full

3b0e medium source element empty

3b0f end of medium reached

3b11 medium magazine not accessible

3b12 medium magazine removed

3b13 medium magazine inserted

3b14 medium magazine locked

3b15 medium magazine unlocked

3b16 mechanical positioning or changer error

3b17 read past end of user object

3b18 element disabled

3b19 element enabled

3b1a data transfer device removed

3b1b data transfer device inserted

3c/00

3d00 invalid bits in identify message

3e00 logical unit has not self-configured yet

3e01 logical unit failure

3e02 timeout on logical unit

3e03 logical unit failed self-test

3e04 logical unit unable to update self-test log

3f00 target operating conditions have changed

3f01 microcode has been changed

3f02 changed operating definition

3f03 inquiry data has changed

3f04 component device attached

3f05 device identifier changed

3f06 redundancy group created or modified

3f07 redundancy group deleted

3f08 spare created or modified

3f09 spare deleted

3f0a volume set created or modified

3f0b volume set deleted

3f0c volume set deassigned

3f0d volume set reassigned

3f0e reported luns data has changed

3f0f echo buffer overwritten

3f10 medium loadable

3f11 medium auxiliary memory accessible

3f12 iscsi ip address added

3f13 iscsi ip address removed

3f14 iscsi ip address changed

4000 ram failure (should use 40 nn)

40nn diagnostic failure on component nn (80h-ffh)

4100 data path failure (should use 40 nn)

4200 power-on or self-test failure (should use 40 nn)

4300 message error

4400 internal target failure

4471 ata device failed set features

4500 select or reselect failure

4600 unsuccessful soft reset

4700 scsi parity error

4701 data phase crc error detected

4702 scsi parity error detected during st data phase

4703 information unit iucrc error detected

4704 asynchronous information protection error detected

4705 protocol service crc error

4706 phy test function in progress

477f some commands cleared by iscsi protocol event

4800 initiator detected error message received

4900 invalid message error

4a00 command phase error

4b00 data phase error

4b01 invalid target port transfer tag received

4b02 too much write data

4b03 ack/nak timeout

4b04 nak received

4b05 data offset error

4b06 initiator response timeout

4b07 connection lost

4c00 logical unit failed self-configuration

4dnn tagged overlapped commands (nn = task tag)

4e00 overlapped commands attempted

4f/00

5000 write append error

5001 write append position error

5002 position error related to timing

5100 erase failure

5101 erase failure - incomplete erase operation detected

5200 cartridge fault

5300 media load or eject failed

5301 unload tape failure

5302 medium removal prevented

5303 medium removal prevented by data transfer element

5304 medium thread or unthread failure

5400 scsi to host system interface failure

5500 system resource failure

5501 system buffer full

5502 insufficient reservation resources

5503 insufficient resources

5504 insufficient registration resources

5505 insufficient access control resources

5506 auxiliary memory out of space

5507 quota error

5508 maximum number of supplemental decryption keys exceeded

5509 medium auxiliary memory not accessible

550a data currently unavailable

550b insufficient power for operation

56/00

5700 unable to recover table-of-contents

5800 generation does not exist

5900 updated block read

5a00 operator request or state change input

5a01 operator medium removal request

5a02 operator selected write protect

5a03 operator selected write permit

5b00 log exception

5b01 threshold condition met

5b02 log counter at maximum

5b03 log list codes exhausted

5c00 rpl status change

5c01 spindles synchronized

5c02 spindles not synchronized

5d00 failure prediction threshold exceeded

5d01 media failure prediction threshold exceeded

5d02 logical unit failure prediction threshold exceeded

5d03 spare area exhaustion prediction threshold exceeded

5d10 hardware impending failure general hard drive failure

5d11 hardware impending failure drive error rate too high

5d12 hardware impending failure data error rate too high

5d13 hardware impending failure seek error rate too high

5d14 hardware impending failure too many block reassigns

5d15 hardware impending failure access times too high

5d16 hardware impending failure start unit times too high

5d17 hardware impending failure channel parametrics

5d18 hardware impending failure controller detected

5d19 hardware impending failure throughput performance

5d1a hardware impending failure seek time performance

5d1b hardware impending failure spin-up retry count

5d1c hardware impending failure drive calibration retry count

5d20 controller impending failure general hard drive failure

5d21 controller impending failure drive error rate too high

5d22 controller impending failure data error rate too high

5d23 controller impending failure seek error rate too high

5d24 controller impending failure too many block reassigns

5d25 controller impending failure access times too high

5d26 controller impending failure start unit times too high

5d27 controller impending failure channel parametrics

5d28 controller impending failure controller detected

5d29 controller impending failure throughput performance

5d2a controller impending failure seek time performance

5d2b controller impending failure spin-up retry count

5d2c controller impending failure drive calibration retry count

5d30 data channel impending failure general hard drive failure

5d31 data channel impending failure drive error rate too high

5d32 data channel impending failure data error rate too high

5d33 data channel impending failure seek error rate too high

5d34 data channel impending failure too many block reassigns

5d35 data channel impending failure access times too high

5d36 data channel impending failure start unit times too high

5d37 data channel impending failure channel parametrics

5d38 data channel impending failure controller detected

5d39 data channel impending failure throughput performance

5d3a data channel impending failure seek time performance

5d3b data channel impending failure spin-up retry count

5d3c data channel impending failure drive calibration retry count

5d40 servo impending failure general hard drive failure

5d41 servo impending failure drive error rate too high

5d42 servo impending failure data error rate too high

5d43 servo impending failure seek error rate too high

5d44 servo impending failure too many block reassigns

5d45 servo impending failure access times too high

5d46 servo impending failure start unit times too high

5d47 servo impending failure channel parametrics

5d48 servo impending failure controller detected

5d49 servo impending failure throughput performance

5d4a servo impending failure seek time performance

5d4b servo impending failure spin-up retry count

5d4c servo impending failure drive calibration retry count

5d50 spindle impending failure general hard drive failure

5d51 spindle impending failure drive error rate too high

5d52 spindle impending failure data error rate too high

5d53 spindle impending failure seek error rate too high

5d54 spindle impending failure too many block reassigns

5d55 spindle impending failure access times too high

5d56 spindle impending failure start unit times too high

5d57 spindle impending failure channel parametrics

5d58 spindle impending failure controller detected

5d59 spindle impending failure throughput performance

5d5a spindle impending failure seek time performance

5d5b spindle impending failure spin-up retry count

5d5c spindle impending failure drive calibration retry count

5d60 firmware impending failure general hard drive failure

5d61 firmware impending failure drive error rate too high

5d62 firmware impending failure data error rate too high

5d63 firmware impending failure seek error rate too high

5d64 firmware impending failure too many block reassigns

5d65 firmware impending failure access times too high

5d66 firmware impending failure start unit times too high

5d67 firmware impending failure channel parametrics

5d68 firmware impending failure controller detected

5d69 firmware impending failure throughput performance

5d6a firmware impending failure seek time performance

5d6b firmware impending failure spin-up retry count

5d6c firmware impending failure drive calibration retry count

5dff failure prediction threshold exceeded (false)

5e00 low power condition on

5e01 idle condition activated by timer

5e02 standby condition activated by timer

5e03 idle condition activated by command

5e04 standby condition activated by command

5e05 idle_b condition activated by timer

5e06 idle_b condition activated by command

5e07 idle_c condition activated by timer

5e08 idle_c condition activated by command

5e09 standby_y condition activated by timer

5e0a standby_y condition activated by command

5e41 power state change to active

5e42 power state change to idle

5e43 power state change to standby

5e45 power state change to sleep

5e47 power state change to device control

5f/00

6000 lamp failure

6100 video acquisition error

6101 unable to acquire video

6102 out of focus

6200 scan head positioning error

6300 end of user area encountered on this track

6301 packet does not fit in available space

6400 illegal mode for this track

6401 invalid packet size

6500 voltage fault

6600 automatic document feeder cover up

6601 automatic document feeder lift up

6602 document jam in automatic document feeder

6603 document miss feed automatic in document feeder

6700 configuration failure

6701 configuration of incapable logical units failed

6702 add logical unit failed

6703 modification of logical unit failed

6704 exchange of logical unit failed

6705 remove of logical unit failed

6706 attachment of logical unit failed

6707 creation of logical unit failed

6708 assign failure occurred

6709 multiply assigned logical unit

670a set target port groups command failed

670b ata device feature not enabled

6800 logical unit not configured

6900 data loss on logical unit

6901 multiple logical unit failures

6902 parity/data mismatch

6a00 informational, refer to log

6b00 state change has occurred

6b01 redundancy level got better

6b02 redundancy level got worse

6c00 rebuild failure occurred

6d00 recalculate failure occurred

6e00 command to logical unit failed

6f00 copy protection key exchange failure - authentication failure

6f01 copy protection key exchange failure - key not present

6f02 copy protection key exchange failure - key not established

6f03 read of scrambled sector without authentication

6f04 media region code is mismatched to logical unit region

6f05 drive region must be permanent/region reset count error

6f06 insufficient block count for binding nonce recording

6f07 conflict in binding nonce recording

70nn decompression exception short algorithm id of nn

7100 decompression exception long algorithm id

7200 session fixation error

7201 session fixation error writing lead-in

7202 session fixation error writing lead-out

7203 session fixation error - incomplete track in session

7204 empty or partially written reserved track

7205 no more track reservations allowed

7206 rmz extension is not allowed

7207 no more test zone extensions are allowed

7300 cd control error

7301 power calibration area almost full

7302 power calibration area is full

7303 power calibration area error

7304 program memory area update failure

7305 program memory area is full

7306 rma/pma is almost full

7310 current power calibration area almost full

7311 current power calibration area is full

7317 rdz is full

7400 security error

7401 unable to decrypt data

7402 unencrypted data encountered while decrypting

7403 incorrect data encryption key

7404 cryptographic integrity validation failed

7405 error decrypting data

7406 unknown signature verification key

7407 encryption parameters not useable

7408 digital signature validation failure

7409 encryption mode mismatch on read

740a encrypted block not raw read enabled

740b incorrect encryption parameters

740c unable to decrypt parameter list

740d encryption algorithm disabled

7410 sa creation parameter value invalid

7411 sa creation parameter value rejected

7412 invalid sa usage

7421 data encryption configuration prevented

7430 sa creation parameter not supported

7440 authentication failed

7461 external data encryption key manager access error

7462 external data encryption key manager error

7463 external data encryption key not found

7464 external data encryption request not authorized

746e external data encryption control timeout

746f external data encryption control error

7471 logical unit access not authorized

7479 security conflict in translated device

75/00

76/00

77/00

78/00

79/00

7a/00

7b/00

7c/00

7d/00

7e/00

7f/00