Rev 2 | Blame | Compare with Previous | Last modification | View Log | RSS feed
# Copyright (C) 1989, 2000 Aladdin Enterprises. All rights reserved.
#
# This software is provided AS-IS with no warranty, either express or
# implied.
#
# This software is distributed under license and may not be copied,
# modified or distributed except as expressly authorized under the terms
# of the license contained in the file LICENSE in this distribution.
#
# For more information about licensing, please refer to
# http://www.ghostscript.com/licensing/. For information on
# commercial licensing, go to http://www.artifex.com/licensing/ or
# contact Artifex Software, Inc., 101 Lucas Valley Road #110,
# San Rafael, CA 94903, U.S.A., +1(415)492-9861.
# $Id: contrib.mak,v 1.28 2002/10/16 23:26:33 giles Exp $
# makefile for contributed device drivers.
# Define the name of this makefile.
CONTRIB_MAK=$(GLSRC)contrib.mak
###### --------------------------- Catalog -------------------------- ######
# The following drivers are user-contributed, and maintained (if at all) by
# users. Please report problems in these drivers to their authors, whose
# e-mail addresses appear below: do not report them to mailing lists or
# mailboxes for general Ghostscript problems.
# Displays:
# MS-DOS (note: not usable with Desqview/X):
# herc Hercules Graphics display [MS-DOS only]
# pe Private Eye display
# Unix and VMS:
# att3b1 AT&T 3b1/Unixpc monochrome display [3b1 only]
# sonyfb Sony Microsystems monochrome display [Sony only]
# sunview SunView window system [SunOS only]
# Printers:
# ap3250 Epson AP3250 printer
# appledmp Apple Dot Matrix Printer (should also work with Imagewriter)
# bj10e Canon BubbleJet BJ10e
# bj200 Canon BubbleJet BJ200; also good for BJ300 in ProPrinter mode
# (see comments in source code)
# bjc600 Canon Color BubbleJet BJC-600, BJC-4000 and BJC-70
# also good for Apple printers like the StyleWriter 2x00
# bjc800 Canon Color BubbleJet BJC-800
# ccr CalComp Raster format
# cdeskjet H-P DeskJet 500C with 1 bit/pixel color
# cdjcolor H-P DeskJet 500C with 24 bit/pixel color and
# high-quality color (Floyd-Steinberg) dithering;
# also good for DeskJet 540C and Citizen Projet IIc (-r200x300)
# cdjmono H-P DeskJet 500C printing black only;
# also good for DeskJet 510, 520, and 540C (black only)
# cdj500 H-P DeskJet 500C (same as cdjcolor)
# cdj550 H-P DeskJet 550C/560C/660C/660Cse
# cljet5 H-P Color LaserJet 5/5M (see below for some notes)
# cljet5c H-P Color LaserJet 5/5M (see below for some notes)
# coslw2p CoStar LabelWriter II II/Plus
# coslwxl CoStar LabelWriter XL
# cp50 Mitsubishi CP50 color printer
# declj250 alternate DEC LJ250 driver
# djet500c H-P DeskJet 500C alternate driver
# (does not work on 550C or 560C)
# dnj650c H-P DesignJet 650C
# epson Epson-compatible dot matrix printers (9- or 24-pin)
# eps9mid Epson-compatible 9-pin, interleaved lines
# (intermediate resolution)
# eps9high Epson-compatible 9-pin, interleaved lines
# (triple resolution)
# epsonc Epson LQ-2550 and Fujitsu 3400/2400/1200 color printers
# hl7x0 Brother HL 720 and HL 730 (HL 760 is PCL compliant);
# also usable with the MFC6550MC Fax Machine.
# ibmpro IBM 9-pin Proprinter
# imagen Imagen ImPress printers
# iwhi Apple Imagewriter in high-resolution mode
# iwlo Apple Imagewriter in low-resolution mode
# iwlq Apple Imagewriter LQ in 320 x 216 dpi mode
# jetp3852 IBM Jetprinter ink-jet color printer (Model #3852)
# lbp8 Canon LBP-8II laser printer
# lips3 Canon LIPS III laser printer in English (CaPSL) mode
# lj250 DEC LJ250 Companion color printer
# lj3100sw H-P LaserJet 3100 (requires installed HP-Software)
# lj4dith H-P LaserJet 4 with Floyd-Steinberg dithering
# lp8000 Epson LP-8000 laser printer
# lq850 Epson LQ850 printer at 360 x 360 DPI resolution;
# also good for Canon BJ300 with LQ850 emulation
# lxm5700m Lexmark 5700 monotone
# m8510 C.Itoh M8510 printer
# necp6 NEC P6/P6+/P60 printers at 360 x 360 DPI resolution
# nwp533 Sony Microsystems NWP533 laser printer [Sony only]
# oki182 Okidata MicroLine 182
# okiibm Okidata MicroLine IBM-compatible printers
# paintjet alternate H-P PaintJet color printer
# photoex Epson Stylus Color Photo, Photo EX, Photo 700
# pj H-P PaintJet XL driver
# pjetxl alternate H-P PaintJet XL driver
# pjxl H-P PaintJet XL color printer
# pjxl300 H-P PaintJet XL300 color printer;
# also good for PaintJet 1200C and CopyJet
# r4081 Ricoh 4081 laser printer
# sj48 StarJet 48 inkjet printer
# sparc SPARCprinter
# st800 Epson Stylus 800 printer
# stcolor Epson Stylus Color
# t4693d2 Tektronix 4693d color printer, 2 bits per R/G/B component
# t4693d4 Tektronix 4693d color printer, 4 bits per R/G/B component
# t4693d8 Tektronix 4693d color printer, 8 bits per R/G/B component
# tek4696 Tektronix 4695/4696 inkjet plotter
# uniprint Unified printer driver -- Configurable Color ESC/P-,
# ESC/P2-, HP-RTL/PCL mono/color driver
# Fax systems:
# cfax SFF format for CAPI fax interface
# dfaxhigh DigiBoard, Inc.'s DigiFAX software format (high resolution)
# dfaxlow DigiFAX low (normal) resolution
# Other raster file formats and devices:
# cif CIF file format for VLSI
# inferno Inferno bitmaps
# mgrmono 1-bit monochrome MGR devices
# mgrgray2 2-bit gray scale MGR devices
# mgrgray4 4-bit gray scale MGR devices
# mgrgray8 8-bit gray scale MGR devices
# mgr4 4-bit (VGA) color MGR devices
# mgr8 8-bit color MGR devices
# sgirgb SGI RGB pixmap format
# sunhmono Harlequin variant of 1-bit Sun raster file
# If you add drivers, it would be nice if you kept each list
# in alphabetical order.
###### ----------------------- End of catalog ----------------------- ######
###### ------------------- MS-DOS display devices ------------------- ######
### ------------------- The Hercules Graphics display ------------------- ###
herc_=$(GLOBJ)gdevherc.$(OBJ)
$(DD)herc.dev : $(herc_)
$(SETDEV) $(DD)herc $(herc_)
$(GLOBJ)gdevherc.$(OBJ) : $(GLSRC)gdevherc.c $(GDEV) $(dos__h)\
$(gsmatrix_h) $(gxbitmap_h)
$(GLCC) $(GLO_)gdevherc.$(OBJ) $(C_) $(GLSRC)gdevherc.c
### ---------------------- The Private Eye display ---------------------- ###
### Note: this driver was contributed by a user: ###
### please contact narf@media-lab.media.mit.edu if you have questions. ###
pe_=$(GLOBJ)gdevpe.$(OBJ)
$(DD)pe.dev : $(pe_)
$(SETDEV) $(DD)pe $(pe_)
$(GLOBJ)gdevpe.$(OBJ) : $(GLSRC)gdevpe.c $(GDEV) $(memory__h)
$(GLCC) $(GLO_)gdevpe.$(OBJ) $(C_) $(GLSRC)gdevpe.c
###### ----------------------- Other displays ------------------------ ######
### -------------- The AT&T 3b1 Unixpc monochrome display --------------- ###
### Note: this driver was contributed by a user: please contact ###
### Andy Fyfe (andy@cs.caltech.edu) if you have questions. ###
att3b1_=$(GLOBJ)gdev3b1.$(OBJ)
$(DD)att3b1.dev : $(att3b1_)
$(SETDEV) $(DD)att3b1 $(att3b1_)
$(GLOBJ)gdev3b1.$(OBJ) : $(GLSRC)gdev3b1.c $(GDEV)
$(GLCC) $(GLO_)gdev3b1.$(OBJ) $(C_) $(GLSRC)gdev3b1.c
### ------------------- Sony NeWS frame buffer device ------------------ ###
### Note: this driver was contributed by a user: please contact ###
### Mike Smolenski (mike@intertech.com) if you have questions. ###
# This is implemented as a 'printer' device.
sonyfb_=$(GLOBJ)gdevsnfb.$(OBJ)
$(DD)sonyfb.dev : $(sonyfb_) $(DD)page.dev
$(SETPDEV) $(DD)sonyfb $(sonyfb_)
$(GLOBJ)gdevsnfb.$(OBJ) : $(GLSRC)gdevsnfb.c $(PDEVH)
$(GLCC) $(GLO_)gdevsnfb.$(OBJ) $(C_) $(GLSRC)gdevsnfb.c
### ------------------------ The SunView device ------------------------ ###
### Note: this driver is maintained by a user: if you have questions, ###
### please contact Andreas Stolcke (stolcke@icsi.berkeley.edu). ###
sunview_=$(GLOBJ)gdevsun.$(OBJ)
$(DD)sunview.dev : $(sunview_)
$(SETDEV) $(DD)sunview $(sunview_)
$(ADDMOD) $(GLGEN)sunview -lib suntool sunwindow pixrect
$(GLOBJ)gdevsun.$(OBJ) : $(GLSRC)gdevsun.c $(GDEV) $(malloc__h)\
$(gscdefs_h) $(gserrors_h) $(gsmatrix_h)
$(GLCC) $(GLO_)gdevsun.$(OBJ) $(C_) $(GLSRC)gdevsun.c
###### --------------- Memory-buffered printer devices --------------- ######
### --------------------- The Apple printer devices --------------------- ###
### Note: these drivers were contributed by users. ###
### If you have questions about the DMP driver, please contact ###
### Mark Wedel (master@cats.ucsc.edu). ###
### If you have questions about the Imagewriter drivers, please contact ###
### Jonathan Luckey (luckey@rtfm.mlb.fl.us). ###
### If you have questions about the Imagewriter LQ driver, please ###
### contact Scott Barker (barkers@cuug.ab.ca). ###
appledmp_=$(GLOBJ)gdevadmp.$(OBJ)
$(GLOBJ)gdevadmp.$(OBJ) : $(GLSRC)gdevadmp.c $(PDEVH)
$(GLCC) $(GLO_)gdevadmp.$(OBJ) $(C_) $(GLSRC)gdevadmp.c
$(DD)appledmp.dev : $(appledmp_) $(DD)page.dev
$(SETPDEV) $(DD)appledmp $(appledmp_)
$(DD)iwhi.dev : $(appledmp_) $(DD)page.dev
$(SETPDEV) $(DD)iwhi $(appledmp_)
$(DD)iwlo.dev : $(appledmp_) $(DD)page.dev
$(SETPDEV) $(DD)iwlo $(appledmp_)
$(DD)iwlq.dev : $(appledmp_) $(DD)page.dev
$(SETPDEV) $(DD)iwlq $(appledmp_)
### ------------ The Canon BubbleJet BJ10e and BJ200 devices ------------ ###
bj10e_=$(GLOBJ)gdevbj10.$(OBJ)
$(DD)bj10e.dev : $(bj10e_) $(DD)page.dev
$(SETPDEV) $(DD)bj10e $(bj10e_)
$(DD)bj200.dev : $(bj10e_) $(DD)page.dev
$(SETPDEV) $(DD)bj200 $(bj10e_)
$(GLOBJ)gdevbj10.$(OBJ) : $(GLSRC)gdevbj10.c $(PDEVH)
$(GLCC) $(GLO_)gdevbj10.$(OBJ) $(C_) $(GLSRC)gdevbj10.c
### ------------- The CalComp Raster Format ----------------------------- ###
### Note: this driver was contributed by a user: please contact ###
### Ernst Muellner (ernst.muellner@oenzl.siemens.de) if you have ###
### questions. ###
ccr_=$(GLOBJ)gdevccr.$(OBJ)
$(DD)ccr.dev : $(ccr_) $(DD)page.dev
$(SETPDEV) $(DD)ccr $(ccr_)
$(GLOBJ)gdevccr.$(OBJ) : $(GLSRC)gdevccr.c $(PDEVH)
$(GLCC) $(GLO_)gdevccr.$(OBJ) $(C_) $(GLSRC)gdevccr.c
### The H-P DeskJet, PaintJet, and DesignJet family color printer devices.###
### Note: there are two different 500C drivers, both contributed by users.###
### If you have questions about the djet500c driver, ###
### please contact AKayser@et.tudelft.nl. ###
### If you have questions about the cdj* drivers, ###
### please contact g.cameron@biomed.abdn.ac.uk. ###
### If you have questions about the dnj560c driver, ###
### please contact koert@zen.cais.com. ###
### If you have questions about the lj4dith driver, ###
### please contact Eckhard.Rueggeberg@ts.go.dlr.de. ###
### The BJC600/BJC4000, BJC800, and ESCP were originally contributed ###
### by yves.arrouye@usa.net, but he no longer answers questions ###
### about them. ###
cdeskjet_=$(GLOBJ)gdevcdj.$(OBJ) $(HPPCL)
$(DD)cdeskjet.dev : $(cdeskjet_) $(DD)page.dev
$(SETPDEV) $(DD)cdeskjet $(cdeskjet_)
$(DD)cdjcolor.dev : $(cdeskjet_) $(DD)page.dev
$(SETPDEV) $(DD)cdjcolor $(cdeskjet_)
$(DD)cdjmono.dev : $(cdeskjet_) $(DD)page.dev
$(SETPDEV) $(DD)cdjmono $(cdeskjet_)
$(DD)cdj500.dev : $(cdeskjet_) $(DD)page.dev
$(SETPDEV) $(DD)cdj500 $(cdeskjet_)
$(DD)cdj550.dev : $(cdeskjet_) $(DD)page.dev
$(SETPDEV) $(DD)cdj550 $(cdeskjet_)
$(DD)declj250.dev : $(cdeskjet_) $(DD)page.dev
$(SETPDEV) $(DD)declj250 $(cdeskjet_)
$(DD)dnj650c.dev : $(cdeskjet_) $(DD)page.dev
$(SETPDEV) $(DD)dnj650c $(cdeskjet_)
$(DD)lj4dith.dev : $(cdeskjet_) $(DD)page.dev
$(SETPDEV) $(DD)lj4dith $(cdeskjet_)
$(DD)pj.dev : $(cdeskjet_) $(DD)page.dev
$(SETPDEV) $(DD)pj $(cdeskjet_)
$(DD)pjxl.dev : $(cdeskjet_) $(DD)page.dev
$(SETPDEV) $(DD)pjxl $(cdeskjet_)
# Note: the pjxl300 driver also works for the CopyJet.
$(DD)pjxl300.dev : $(cdeskjet_) $(DD)page.dev
$(SETPDEV) $(DD)pjxl300 $(cdeskjet_)
# Note: the BJC600 driver also works for the BJC4000.
$(DD)bjc600.dev : $(cdeskjet_) $(DD)page.dev
$(SETPDEV) $(DD)bjc600 $(cdeskjet_)
$(DD)bjc800.dev : $(cdeskjet_) $(DD)page.dev
$(SETPDEV) $(DD)bjc800 $(cdeskjet_)
$(DD)escp.dev : $(cdeskjet_) $(DD)page.dev
$(SETPDEV) $(DD)escp $(cdeskjet_)
# NB: you can also customise the build if required, using
# -DBitsPerPixel=<number> if you wish the default to be other than 24
# for the generic drivers (cdj500, cdj550, pjxl300, pjtest, pjxltest).
gdevbjc_h=$(GLSRC)gdevbjc.h
$(GLOBJ)gdevcdj.$(OBJ) : $(GLSRC)gdevcdj.c $(std_h) $(PDEVH)\
$(gsparam_h) $(gsstate_h) $(gxlum_h)\
$(gdevbjc_h) $(gdevpcl_h)
$(GLCC) $(GLO_)gdevcdj.$(OBJ) $(C_) $(GLSRC)gdevcdj.c
djet500c_=$(GLOBJ)gdevdjtc.$(OBJ) $(HPPCL)
$(DD)djet500c.dev : $(djet500c_) $(DD)page.dev
$(SETPDEV) $(DD)djet500c $(djet500c_)
$(GLOBJ)gdevdjtc.$(OBJ) : $(GLSRC)gdevdjtc.c $(PDEVH) $(malloc__h) $(gdevpcl_h)
$(GLCC) $(GLO_)gdevdjtc.$(OBJ) $(C_) $(GLSRC)gdevdjtc.c
### -------------------- The H-P Color LaserJet 5/5M -------------------- ###
### There are two different drivers for this device.
### For questions about the cljet5/cljet5pr (more general) driver, contact
### Jan Stoeckenius <jan@orimp.com>
### For questions about the cljet5c (simple) driver, contact
### Henry Stiles <henrys@meerkat.dimensional.com>
### Note that this is a long-edge-feed device, so the default page size is
### wider than it is high. To print portrait pages, specify the page size
### explicitly, e.g. -c letter or -c a4 on the command line.
cljet5_=$(GLOBJ)gdevclj.$(OBJ) $(HPPCL)
$(DD)cljet5.dev : $(DEVS_MAK) $(cljet5_) $(GLD)page.dev
$(SETPDEV) $(DD)cljet5 $(cljet5_)
# The cljet5pr driver has hacks for trying to handle page rotation.
# The hacks only work with one special PCL interpreter. Don't use it!
$(DD)cljet5pr.dev : $(DEVS_MAK) $(cljet5_) $(GLD)page.dev
$(SETPDEV) $(DD)cljet5pr $(cljet5_)
$(GLOBJ)gdevclj.$(OBJ) : $(GLSRC)gdevclj.c $(math__h) $(PDEVH)\
$(gx_h) $(gsparam_h) $(gdevpcl_h)
$(GLCC) $(GLO_)gdevclj.$(OBJ) $(C_) $(GLSRC)gdevclj.c
cljet5c_=$(GLOBJ)gdevcljc.$(OBJ) $(HPPCL)
$(DD)cljet5c.dev : $(DEVS_MAK) $(cljet5c_) $(GLD)page.dev
$(SETPDEV) $(DD)cljet5c $(cljet5c_)
$(GLOBJ)gdevcljc.$(OBJ) : $(GLSRC)gdevcljc.c $(math__h) $(PDEVH) $(gdevpcl_h)
$(GLCC) $(GLO_)gdevcljc.$(OBJ) $(C_) $(GLSRC)gdevcljc.c
### --------------- The H-P LaserJet 3100 software device --------------- ###
### NOTE: This driver requires installed HP-Software to print. ###
### It can be used with smbclient to print from an UNIX box to a ###
### LaserJet 3100 printer attached to a MS-Windows box. ###
### NOTE: this driver was contributed by a user: please contact ###
### Ulrich Schmid (uschmid@mail.hh.provi.de) if you have questions. ###
lj3100sw_=$(GLOBJ)gdevl31s.$(OBJ) $(GLOBJ)gdevmeds.$(OBJ)
$(DD)lj3100sw.dev : $(lj3100sw_) $(DD)page.dev
$(SETPDEV) $(DD)lj3100sw $(lj3100sw_)
gdevmeds_h=$(GLSRC)gdevmeds.h $(gdevprn_h)
$(GLOBJ)gdevl31s.$(OBJ) : $(GLSRC)gdevl31s.c $(gdevmeds_h) $(PDEVH)
$(GLCC) $(GLO_)gdevl31s.$(OBJ) $(C_) $(GLSRC)gdevl31s.c
$(GLOBJ)gdevmeds.$(OBJ) : $(GLSRC)gdevmeds.c $(AK) $(gdevmeds_h)
$(GLCC) $(GLO_)gdevmeds.$(OBJ) $(C_) $(GLSRC)gdevmeds.c
### ------ CoStar LabelWriter II II/Plus device ------ ###
### Contributed by Mike McCauley mikem@open.com.au ###
coslw_=$(GLOBJ)gdevcslw.$(OBJ)
$(DD)coslw2p.dev : $(coslw_) $(DD)page.dev
$(SETPDEV) $(DD)coslw2p $(coslw_)
$(DD)coslwxl.dev : $(coslw_) $(DD)page.dev
$(SETPDEV) $(DD)coslwxl $(coslw_)
$(GLOBJ)gdevcslw.$(OBJ) : $(GLSRC)gdevcslw.c $(PDEVH)
$(GLCC) $(GLO_)gdevcslw.$(OBJ) $(C_) $(GLSRC)gdevcslw.c
### -------------------- The Mitsubishi CP50 printer -------------------- ###
### Note: this driver was contributed by a user: please contact ###
### Michael Hu (michael@ximage.com) if you have questions. ###
cp50_=$(GLOBJ)gdevcp50.$(OBJ)
$(DD)cp50.dev : $(cp50_) $(DD)page.dev
$(SETPDEV) $(DD)cp50 $(cp50_)
$(GLOBJ)gdevcp50.$(OBJ) : $(GLSRC)gdevcp50.c $(PDEVH)
$(GLCC) $(GLO_)gdevcp50.$(OBJ) $(C_) $(GLSRC)gdevcp50.c
### ----------------- The generic Epson printer device ----------------- ###
### Note: most of this code was contributed by users. Please contact ###
### the following people if you have questions: ###
### eps9mid - Guenther Thomsen (thomsen@cs.tu-berlin.de) ###
### eps9high - David Wexelblat (dwex@mtgzfs3.att.com) ###
### ibmpro - James W. Birdsall (jwbirdsa@picarefy.picarefy.com) ###
epson_=$(GLOBJ)gdevepsn.$(OBJ)
$(DD)epson.dev : $(epson_) $(DD)page.dev
$(SETPDEV) $(DD)epson $(epson_)
$(DD)eps9mid.dev : $(epson_) $(DD)page.dev
$(SETPDEV) $(DD)eps9mid $(epson_)
$(DD)eps9high.dev : $(epson_) $(DD)page.dev
$(SETPDEV) $(DD)eps9high $(epson_)
$(GLOBJ)gdevepsn.$(OBJ) : $(GLSRC)gdevepsn.c $(PDEVH)
$(GLCC) $(GLO_)gdevepsn.$(OBJ) $(C_) $(GLSRC)gdevepsn.c
### ----------------- The IBM Proprinter printer device ---------------- ###
$(DD)ibmpro.dev : $(epson_) $(DD)page.dev
$(SETPDEV) $(DD)ibmpro $(epson_)
### -------------- The Epson LQ-2550 color printer device -------------- ###
### Note: this driver was contributed by users: please contact ###
### Dave St. Clair (dave@exlog.com) if you have questions. ###
epsonc_=$(GLOBJ)gdevepsc.$(OBJ)
$(DD)epsonc.dev : $(epsonc_) $(DD)page.dev
$(SETPDEV) $(DD)epsonc $(epsonc_)
$(GLOBJ)gdevepsc.$(OBJ) : $(GLSRC)gdevepsc.c $(PDEVH)
$(GLCC) $(GLO_)gdevepsc.$(OBJ) $(C_) $(GLSRC)gdevepsc.c
### ------------- The Epson ESC/P 2 language printer devices ------------- ###
### Note: these drivers were contributed by users. ###
### For questions about the Stylus 800 and AP3250 drivers, please contact ###
### Richard Brown (rab@tauon.ph.unimelb.edu.au). ###
### For questions about the Stylus Color drivers, please contact ###
### Gunther Hess (gunther@elmos.de). ###
ESCP2=$(GLOBJ)gdevescp.$(OBJ)
$(GLOBJ)gdevescp.$(OBJ) : $(GLSRC)gdevescp.c $(PDEVH)
$(GLCC) $(GLO_)gdevescp.$(OBJ) $(C_) $(GLSRC)gdevescp.c
$(DD)ap3250.dev : $(ESCP2) $(DD)page.dev
$(SETPDEV) $(DD)ap3250 $(ESCP2)
$(DD)st800.dev : $(ESCP2) $(DD)page.dev
$(SETPDEV) $(DD)st800 $(ESCP2)
stcolor1_=$(GLOBJ)gdevstc.$(OBJ) $(GLOBJ)gdevstc1.$(OBJ) $(GLOBJ)gdevstc2.$(OBJ)
stcolor2_=$(GLOBJ)gdevstc3.$(OBJ) $(GLOBJ)gdevstc4.$(OBJ)
$(DD)stcolor.dev : $(stcolor1_) $(stcolor2_) $(DD)page.dev
$(SETPDEV) $(DD)stcolor $(stcolor1_)
$(ADDMOD) $(GLGEN)stcolor -obj $(stcolor2_)
gdevstc_h=$(GLSRC)gdevstc.h $(gdevprn_h) $(gsparam_h) $(gsstate_h)
$(GLOBJ)gdevstc.$(OBJ) : $(GLSRC)gdevstc.c $(gdevstc_h) $(PDEVH)
$(GLCC) $(GLO_)gdevstc.$(OBJ) $(C_) $(GLSRC)gdevstc.c
$(GLOBJ)gdevstc1.$(OBJ) : $(GLSRC)gdevstc1.c $(gdevstc_h) $(PDEVH)
$(GLCC) $(GLO_)gdevstc1.$(OBJ) $(C_) $(GLSRC)gdevstc1.c
$(GLOBJ)gdevstc2.$(OBJ) : $(GLSRC)gdevstc2.c $(gdevstc_h) $(PDEVH)
$(GLCC) $(GLO_)gdevstc2.$(OBJ) $(C_) $(GLSRC)gdevstc2.c
$(GLOBJ)gdevstc3.$(OBJ) : $(GLSRC)gdevstc3.c $(gdevstc_h) $(PDEVH)
$(GLCC) $(GLO_)gdevstc3.$(OBJ) $(C_) $(GLSRC)gdevstc3.c
$(GLOBJ)gdevstc4.$(OBJ) : $(GLSRC)gdevstc4.c $(gdevstc_h) $(PDEVH)
$(GLCC) $(GLO_)gdevstc4.$(OBJ) $(C_) $(GLSRC)gdevstc4.c
###--------------- Added Omni --------------------------###
epclr_h1=$(GLSRC)defs.h
$(DD)omni.dev : $(GLOBJ)gomni.$(OBJ) $(DD)page.dev
$(SETPDEV) $(DD)omni $(GLOBJ)gomni.$(OBJ)
$(GLOBJ)gomni.$(OBJ) : $(GLSRC)gomni.c $(epclr_h1) $(PDEVH)
$(GLCC) $(GLO_)gomni.$(OBJ) $(C_) $(GLSRC)gomni.c
### --------------- Ugly/Update -> Unified Printer Driver ---------------- ###
### For questions about this driver, please contact: ###
### Gunther Hess (gunther@elmos.de) ###
uniprint_=$(GLOBJ)gdevupd.$(OBJ)
$(DD)uniprint.dev : $(uniprint_) $(DD)page.dev
$(SETPDEV) $(DD)uniprint $(uniprint_)
$(GLOBJ)gdevupd.$(OBJ) : $(GLSRC)gdevupd.c $(PDEVH) $(gsparam_h)
$(GLCC) $(GLO_)gdevupd.$(OBJ) $(C_) $(GLSRC)gdevupd.c
### ------------ The H-P PaintJet color printer device ----------------- ###
### Note: this driver also supports the DEC LJ250 color printer, which ###
### has a PaintJet-compatible mode, and the PaintJet XL. ###
### If you have questions about the XL, please contact Rob Reiss ###
### (rob@moray.berkeley.edu). ###
PJET=$(GLOBJ)gdevpjet.$(OBJ) $(HPPCL)
$(GLOBJ)gdevpjet.$(OBJ) : $(GLSRC)gdevpjet.c $(PDEVH) $(gdevpcl_h)
$(GLCC) $(GLO_)gdevpjet.$(OBJ) $(C_) $(GLSRC)gdevpjet.c
$(DD)lj250.dev : $(PJET) $(DD)page.dev
$(SETPDEV) $(DD)lj250 $(PJET)
$(DD)paintjet.dev : $(PJET) $(DD)page.dev
$(SETPDEV) $(DD)paintjet $(PJET)
$(DD)pjetxl.dev : $(PJET) $(DD)page.dev
$(SETPDEV) $(DD)pjetxl $(PJET)
###--------------------- The Brother HL 7x0 printer --------------------- ###
### Note: this driver was contributed by users: please contact ###
### Pierre-Olivier Gaillard (pierre.gaillard@hol.fr) ###
### for questions about the basic driver; ###
### Ross Martin (ross@ross.interwrx.com, martin@walnut.eas.asu.edu) ###
### for questions about usage with the MFC6550MC Fax Machine. ###
hl7x0_=$(GLOBJ)gdevhl7x.$(OBJ)
$(DD)hl7x0.dev : $(hl7x0_) $(DD)page.dev
$(SETPDEV) $(DD)hl7x0 $(hl7x0_)
$(GLOBJ)gdevhl7x.$(OBJ) : $(GLSRC)gdevhl7x.c $(PDEVH) $(gdevpcl_h)
$(GLCC) $(GLO_)gdevhl7x.$(OBJ) $(C_) $(GLSRC)gdevhl7x.c
### -------------- Imagen ImPress Laser Printer device ----------------- ###
### Note: this driver was contributed by a user: please contact ###
### Alan Millar (AMillar@bolis.sf-bay.org) if you have questions. ###
### Set USE_BYTE_STREAM if using parallel interface; ###
### Don't set it if using 'ipr' spooler (default). ###
### You may also add -DA4 if needed for A4 paper. ###
imagen_=$(GLOBJ)gdevimgn.$(OBJ)
$(DD)imagen.dev : $(imagen_) $(DD)page.dev
$(SETPDEV) $(DD)imagen $(imagen_)
# Uncomment the first line for the ipr spooler, the second line for parallel.
IMGN_OPT=
#IMGN_OPT=-DUSE_BYTE_STREAM
$(GLOBJ)gdevimgn.$(OBJ) : $(GLSRC)gdevimgn.c $(PDEVH)
$(GLCC) $(IMGN_OPT) $(GLO_)gdevimgn.$(OBJ) $(C_) $(GLSRC)gdevimgn.c
### ------- The IBM 3852 JetPrinter color inkjet printer device -------- ###
### Note: this driver was contributed by users: please contact ###
### Kevin Gift (kgift@draper.com) if you have questions. ###
### Note that the paper size that can be addressed by the graphics mode ###
### used in this driver is fixed at 7-1/2 inches wide (the printable ###
### width of the jetprinter itself.) ###
jetp3852_=$(GLOBJ)gdev3852.$(OBJ)
$(DD)jetp3852.dev : $(jetp3852_) $(DD)page.dev
$(SETPDEV) $(DD)jetp3852 $(jetp3852_)
$(GLOBJ)gdev3852.$(OBJ) : $(GLSRC)gdev3852.c $(PDEVH) $(gdevpcl_h)
$(GLCC) $(GLO_)gdev3852.$(OBJ) $(C_) $(GLSRC)gdev3852.c
### ---------- The Canon LBP-8II and LIPS III printer devices ---------- ###
### Note: these drivers were contributed by users. ###
### For questions about these drivers, please contact ###
### Lauri Paatero, lauri.paatero@paatero.pp.fi ###
lbp8_=$(GLOBJ)gdevlbp8.$(OBJ)
$(DD)lbp8.dev : $(lbp8_) $(DD)page.dev
$(SETPDEV) $(DD)lbp8 $(lbp8_)
$(DD)lips3.dev : $(lbp8_) $(DD)page.dev
$(SETPDEV) $(DD)lips3 $(lbp8_)
$(GLOBJ)gdevlbp8.$(OBJ) : $(GLSRC)gdevlbp8.c $(PDEVH)
$(GLCC) $(GLO_)gdevlbp8.$(OBJ) $(C_) $(GLSRC)gdevlbp8.c
### -------------- The Epson LP-8000 laser printer device -------------- ###
### Note: this driver was contributed by a user: please contact Oleg ###
### Oleg Fat'yanov <faty1@rlem.titech.ac.jp> if you have questions.###
lp8000_=$(GLOBJ)gdevlp8k.$(OBJ)
$(DD)lp8000.dev : $(lp8000_) $(DD)page.dev
$(SETPDEV) $(DD)lp8000 $(lp8000_)
$(GLOBJ)gdevlp8k.$(OBJ) : $(GLSRC)gdevlp8k.c $(PDEVH)
$(GLCC) $(GLO_)gdevlp8k.$(OBJ) $(C_) $(GLSRC)gdevlp8k.c
### -------------- The C.Itoh M8510 printer device --------------------- ###
### Note: this driver was contributed by a user: please contact Bob ###
### Smith <bob@snuffy.penfield.ny.us> if you have questions. ###
m8510_=$(GLOBJ)gdev8510.$(OBJ)
$(DD)m8510.dev : $(m8510_) $(DD)page.dev
$(SETPDEV) $(DD)m8510 $(m8510_)
$(GLOBJ)gdev8510.$(OBJ) : $(GLSRC)gdev8510.c $(PDEVH)
$(GLCC) $(GLO_)gdev8510.$(OBJ) $(C_) $(GLSRC)gdev8510.c
### -------------- 24pin Dot-matrix printer with 360DPI ---------------- ###
### Note: this driver was contributed by users. Please contact: ###
### Andreas Schwab (schwab@ls5.informatik.uni-dortmund.de) for ###
### questions about the NEC P6; ###
### Christian Felsch (felsch@tu-harburg.d400.de) for ###
### questions about the Epson LQ850. ###
dm24_=$(GLOBJ)gdevdm24.$(OBJ)
$(DD)necp6.dev : $(dm24_) $(DD)page.dev
$(SETPDEV) $(DD)necp6 $(dm24_)
$(DD)lq850.dev : $(dm24_) $(DD)page.dev
$(SETPDEV) $(DD)lq850 $(dm24_)
$(GLOBJ)gdevdm24.$(OBJ) : $(GLSRC)gdevdm24.c $(PDEVH)
$(GLCC) $(GLO_)gdevdm24.$(OBJ) $(C_) $(GLSRC)gdevdm24.c
### ----------------- Lexmark 5700 printer ----------------------------- ###
### Note: this driver was contributed by users. Please contact: ###
### Stephen Taylor (setaylor@ma.ultranet.com) if you have questions. ###
lxm5700m_=$(GLOBJ)gdevlxm.$(OBJ)
$(DD)lxm5700m.dev : $(lxm5700m_) $(DD)page.dev
$(SETPDEV) $(DD)lxm5700m $(lxm5700m_)
$(GLOBJ)gdevlxm.$(OBJ) : $(GLSRC)gdevlxm.c $(PDEVH) $(gsparams_h)
$(GLCC) $(GLO_)gdevlxm.$(OBJ) $(C_) $(GLSRC)gdevlxm.c
### ----------------- The Okidata MicroLine 182 device ----------------- ###
### Note: this driver was contributed by a user: please contact ###
### Maarten Koning (smeg@bnr.ca) if you have questions. ###
oki182_=$(GLOBJ)gdevo182.$(OBJ)
$(DD)oki182.dev : $(oki182_) $(DD)page.dev
$(SETPDEV) $(DD)oki182 $(oki182_)
$(GLOBJ)gdevo182.$(OBJ) : $(GLSRC)gdevo182.c $(PDEVH)
$(GLCC) $(GLO_)gdevo182.$(OBJ) $(C_) $(GLSRC)gdevo182.c
### ------------- The Okidata IBM compatible printer device ------------ ###
### Note: this driver was contributed by a user: please contact ###
### Charles Mack (chasm@netcom.com) if you have questions. ###
okiibm_=$(GLOBJ)gdevokii.$(OBJ)
$(DD)okiibm.dev : $(okiibm_) $(DD)page.dev
$(SETPDEV) $(DD)okiibm $(okiibm_)
$(GLOBJ)gdevokii.$(OBJ) : $(GLSRC)gdevokii.c $(PDEVH)
$(GLCC) $(GLO_)gdevokii.$(OBJ) $(C_) $(GLSRC)gdevokii.c
### ------------------ The Epson Stylus Photo devices ------------------ ###
### This driver was contributed by a user: please contact ###
### Zoltan Kocsi (zoltan@bendor.com.au) if you have questions. ###
photoex_=$(GLOBJ)gdevphex.$(OBJ)
$(DD)photoex.dev : $(photoex_) $(DD)page.dev
$(SETPDEV) $(DD)photoex $(photoex_)
$(GLOBJ)gdevphex.$(OBJ) : $(GLSRC)gdevphex.c $(PDEVH)
$(GLCC) $(GLO_)gdevphex.$(OBJ) $(C_) $(GLSRC)gdevphex.c
### ------------- The Ricoh 4081 laser printer device ------------------ ###
### Note: this driver was contributed by users: ###
### please contact kdw@oasis.icl.co.uk if you have questions. ###
r4081_=$(GLOBJ)gdev4081.$(OBJ)
$(DD)r4081.dev : $(r4081_) $(DD)page.dev
$(SETPDEV) $(DD)r4081 $(r4081_)
$(GLOBJ)gdev4081.$(OBJ) : $(GLSRC)gdev4081.c $(PDEVH)
$(GLCC) $(GLO_)gdev4081.$(OBJ) $(C_) $(GLSRC)gdev4081.c
### -------------------- Sony NWP533 printer device -------------------- ###
### Note: this driver was contributed by a user: please contact Tero ###
### Kivinen (kivinen@joker.cs.hut.fi) if you have questions. ###
nwp533_=$(GLOBJ)gdevn533.$(OBJ)
$(DD)nwp533.dev : $(nwp533_) $(DD)page.dev
$(SETPDEV) $(DD)nwp533 $(nwp533_)
$(GLOBJ)gdevn533.$(OBJ) : $(GLSRC)gdevn533.c $(PDEVH)
$(GLCC) $(GLO_)gdevn533.$(OBJ) $(C_) $(GLSRC)gdevn533.c
### ------------------------- The SPARCprinter ------------------------- ###
### Note: this driver was contributed by users: please contact Martin ###
### Schulte (schulte@thp.uni-koeln.de) if you have questions. ###
### He would also like to hear from anyone using the driver. ###
### Please consult the source code for additional documentation. ###
sparc_=$(GLOBJ)gdevsppr.$(OBJ)
$(DD)sparc.dev : $(sparc_) $(DD)page.dev
$(SETPDEV) $(DD)sparc $(sparc_)
$(GLOBJ)gdevsppr.$(OBJ) : $(GLSRC)gdevsppr.c $(PDEVH)
$(GLCC) $(GLO_)gdevsppr.$(OBJ) $(C_) $(GLSRC)gdevsppr.c
### ----------------- The StarJet SJ48 device -------------------------- ###
### Note: this driver was contributed by a user: if you have questions, ###
### . ###
### please contact Mats Akerblom (f86ma@dd.chalmers.se). ###
sj48_=$(GLOBJ)gdevsj48.$(OBJ)
$(DD)sj48.dev : $(sj48_) $(DD)page.dev
$(SETPDEV) $(DD)sj48 $(sj48_)
$(GLOBJ)gdevsj48.$(OBJ) : $(GLSRC)gdevsj48.c $(PDEVH)
$(GLCC) $(GLO_)gdevsj48.$(OBJ) $(C_) $(GLSRC)gdevsj48.c
### ----------------- Tektronix 4396d color printer -------------------- ###
### Note: this driver was contributed by a user: please contact ###
### Karl Hakimian (hakimian@haney.eecs.wsu.edu) ###
### if you have questions. ###
t4693d_=$(GLOBJ)gdev4693.$(OBJ)
$(DD)t4693d2.dev : $(t4693d_) $(DD)page.dev
$(SETPDEV) $(DD)t4693d2 $(t4693d_)
$(DD)t4693d4.dev : $(t4693d_) $(DD)page.dev
$(SETPDEV) $(DD)t4693d4 $(t4693d_)
$(DD)t4693d8.dev : $(t4693d_) $(DD)page.dev
$(SETPDEV) $(DD)t4693d8 $(t4693d_)
$(GLOBJ)gdev4693.$(OBJ) : $(GLSRC)gdev4693.c $(PDEVH)
$(GLCC) $(GLO_)gdev4693.$(OBJ) $(C_) $(GLSRC)gdev4693.c
### -------------------- Tektronix ink-jet printers -------------------- ###
### Note: this driver was contributed by a user: please contact ###
### Karsten Spang (spang@nbivax.nbi.dk) if you have questions. ###
tek4696_=$(GLOBJ)gdevtknk.$(OBJ)
$(DD)tek4696.dev : $(tek4696_) $(DD)page.dev
$(SETPDEV) $(DD)tek4696 $(tek4696_)
$(GLOBJ)gdevtknk.$(OBJ) : $(GLSRC)gdevtknk.c $(PDEVH) $(malloc__h)
$(GLCC) $(GLO_)gdevtknk.$(OBJ) $(C_) $(GLSRC)gdevtknk.c
###### ------------------------- Fax devices ------------------------- ######
### ------------------------- CAPI fax devices -------------------------- ###
### Note: this driver was contributed by a user: please contact ###
### Peter Schaefer <peter.schaefer@gmx.de> if you have questions. ###
cfax_=$(GLOBJ)gdevcfax.$(OBJ)
$(DD)cfax.dev : $(cfax_) $(DD)fax.dev
$(SETDEV) $(DD)cfax $(cfax_)
$(ADDMOD) $(DD)cfax -include $(DD)fax
$(GLOBJ)gdevcfax.$(OBJ) : $(GLSRC)gdevcfax.c $(PDEVH)\
$(gdevfax_h) $(scfx_h) $(strimpl_h)
$(GLCC) $(GLO_)gdevcfax.$(OBJ) $(C_) $(GLSRC)gdevcfax.c
### ------------------------- The DigiFAX device ------------------------ ###
### This driver outputs images in a format suitable for use with ###
### DigiBoard, Inc.'s DigiFAX software. Use -sDEVICE=dfaxhigh for ###
### high resolution output, -sDEVICE=dfaxlow for normal output. ###
### Note: this driver was contributed by a user: please contact ###
### Rick Richardson (rick@digibd.com) if you have questions. ###
dfax_=$(GLOBJ)gdevdfax.$(OBJ)
$(DD)dfaxlow.dev : $(dfax_) $(DD)tfax.dev
$(SETDEV) $(DD)dfaxlow $(dfax_)
$(ADDMOD) $(GLGEN)dfaxlow -include $(DD)tfax
$(DD)dfaxhigh.dev : $(dfax_) $(DD)tfax.dev
$(SETDEV) $(DD)dfaxhigh $(dfax_)
$(ADDMOD) $(GLGEN)dfaxhigh -include $(DD)tfax
$(GLOBJ)gdevdfax.$(OBJ) : $(GLSRC)gdevdfax.c $(PDEVH)\
$(gdevfax_h) $(gdevtfax_h) $(scfx_h) $(strimpl_h)
$(GLCC) $(GLO_)gdevdfax.$(OBJ) $(C_) $(GLSRC)gdevdfax.c
###### --------------------- Raster file formats --------------------- ######
### -------------------- The CIF file format for VLSI ------------------ ###
### Note: this driver was contributed by a user: please contact ###
### Frederic Petrot (petrot@masi.ibp.fr) if you have questions. ###
cif_=$(GLOBJ)gdevcif.$(OBJ)
$(DD)cif.dev : $(cif_) $(DD)page.dev
$(SETPDEV) $(DD)cif $(cif_)
$(GLOBJ)gdevcif.$(OBJ) : $(GLSRC)gdevcif.c $(PDEVH)
$(GLCC) $(GLO_)gdevcif.$(OBJ) $(C_) $(GLSRC)gdevcif.c
### ------------------------- Inferno bitmaps -------------------------- ###
### Note: this driver was contributed by a user: please contact ###
### Russ Cox <rsc@plan9.bell-labs.com> if you have questions. ###
inferno_=$(GLOBJ)gdevifno.$(OBJ)
$(DD)inferno.dev : $(inferno_) $(DD)page.dev
$(SETPDEV) $(DD)inferno $(inferno_)
$(GLOBJ)gdevifno.$(OBJ) : $(GLSRC)gdevifno.c $(PDEVH)\
$(gsparam_h) $(gxlum_h)
$(GLCC) $(GLO_)gdevifno.$(OBJ) $(C_) $(GLSRC)gdevifno.c
### --------------------------- MGR devices ---------------------------- ###
### Note: these drivers were contributed by a user: please contact ###
### Carsten Emde (ce@ceag.ch) if you have questions. ###
MGR=$(GLOBJ)gdevmgr.$(OBJ) $(GLOBJ)gdevpccm.$(OBJ)
gdevmgr_h= $(GLSRC)gdevmgr.h
$(GLOBJ)gdevmgr.$(OBJ) : $(GLSRC)gdevmgr.c $(PDEVH)\
$(gdevmgr_h) $(gdevpccm_h)
$(GLCC) $(GLO_)gdevmgr.$(OBJ) $(C_) $(GLSRC)gdevmgr.c
$(DD)mgrmono.dev : $(MGR) $(DD)page.dev
$(SETPDEV) $(DD)mgrmono $(MGR)
$(DD)mgrgray2.dev : $(MGR) $(DD)page.dev
$(SETPDEV) $(DD)mgrgray2 $(MGR)
$(DD)mgrgray4.dev : $(MGR) $(DD)page.dev
$(SETPDEV) $(DD)mgrgray4 $(MGR)
$(DD)mgrgray8.dev : $(MGR) $(DD)page.dev
$(SETPDEV) $(DD)mgrgray8 $(MGR)
$(DD)mgr4.dev : $(MGR) $(DD)page.dev
$(SETPDEV) $(DD)mgr4 $(MGR)
$(DD)mgr8.dev : $(MGR) $(DD)page.dev
$(SETPDEV) $(DD)mgr8 $(MGR)
### -------------------------- SGI RGB pixmaps -------------------------- ###
sgirgb_=$(GLOBJ)gdevsgi.$(OBJ)
$(DD)sgirgb.dev : $(sgirgb_) $(DD)page.dev
$(SETPDEV) $(DD)sgirgb $(sgirgb_)
gdevsgi_h=$(GLSRC)gdevsgi.h
$(GLOBJ)gdevsgi.$(OBJ) : $(GLSRC)gdevsgi.c $(PDEVH) $(gdevsgi_h)
$(GLCC) $(GLO_)gdevsgi.$(OBJ) $(C_) $(GLSRC)gdevsgi.c
### ---------------- Sun raster files ---------------- ###
sunr_=$(GLOBJ)gdevsunr.$(OBJ)
# Harlequin variant, 1-bit
$(DD)sunhmono.dev : $(sunr_) $(DD)page.dev
$(SETPDEV) $(DD)sunhmono $(sunr_)
$(GLOBJ)gdevsunr.$(OBJ) : $(GLSRC)gdevsunr.c $(PDEVH)
$(GLCC) $(GLO_)gdevsunr.$(OBJ) $(C_) $(GLSRC)gdevsunr.c