Rev 2 | Blame | Compare with Previous | Last modification | View Log | RSS feed
# Copyright (C) 1997, 2003-2004 artofcode LLC. All rights reserved.
#
# This software is provided AS-IS with no warranty, either express or
# implied.
#
# This software is distributed under license and may not be copied,
# modified or distributed except as expressly authorized under the terms
# of the license contained in the file LICENSE in this distribution.
#
# For more information about licensing, please refer to
# http://www.ghostscript.com/licensing/. For information on
# commercial licensing, go to http://www.artifex.com/licensing/ or
# contact Artifex Software, Inc., 101 Lucas Valley Road #110,
# San Rafael, CA 94903, U.S.A., +1(415)492-9861.
# $Id: Makefile.in,v 1.41 2005/08/24 19:02:22 giles Exp $
# makefile template for/from the autoconf build.
# @configure_input@
# ------------------------------- Options ------------------------------- #
####### The following are the only parts of the file you should need to edit.
# Define the directory for the final executable, and the
# source, generated intermediate file, and object directories
# for the graphics library (GL) and the PostScript/PDF interpreter (PS).
BINDIR=./bin
GLSRCDIR=./src
GLGENDIR=./obj
GLOBJDIR=./obj
PSSRCDIR=./src
PSLIBDIR=./lib
PSGENDIR=./obj
PSOBJDIR=./obj
# Do not edit the next group of lines.
include $(GLSRCDIR)/version.mak
DD=$(GLGENDIR)/
GLD=$(GLGENDIR)/
PSD=$(PSGENDIR)/
# ------ Generic options ------ #
# Define the installation commands and target directories for
# executables and files. The commands are only relevant to `make install';
# the directories also define the default search path for the
# initialization files (gs_*.ps) and the fonts.
INSTALL = $(GLSRCDIR)/instcopy -c
INSTALL_PROGRAM = $(INSTALL) -m 755
INSTALL_DATA = $(INSTALL) -m 644
prefix = @prefix@
exec_prefix = @exec_prefix@
bindir = @bindir@
scriptdir = $(bindir)
libdir = @libdir@
mandir = @mandir@
man1ext = 1
datadir = @datadir@
gsdir = $(datadir)/ghostscript
gsdatadir = $(gsdir)/$(GS_DOT_VERSION)
docdir=$(gsdatadir)/doc
exdir=$(gsdatadir)/examples
GS_DOCDIR=$(docdir)
# Define the default directory/ies for the runtime
# initialization and font files. Separate multiple directories with a :.
GS_LIB_DEFAULT=$(gsdatadir)/lib:$(gsdatadir)/Resource:$(gsdir)/fonts
# Define the default directory for cached data files
# this must be a single path.
GS_CACHE_DIR="~/.ghostscript/cache/"
# Define whether or not searching for initialization files should always
# look in the current directory first. This leads to well-known security
# and confusion problems, but users insist on it.
# NOTE: this also affects searching for files named on the command line:
# see the "File searching" section of Use.htm for full details.
# Because of this, setting SEARCH_HERE_FIRST to 0 is not recommended.
SEARCH_HERE_FIRST=1
# Define the name of the interpreter initialization file.
# (There is no reason to change this.)
GS_INIT=gs_init.ps
# Choose generic configuration options.
# -DDEBUG
# includes debugging features (-Z switch) in the code.
# Code runs substantially slower even if no debugging switches
# are set.
# -DNOPRIVATE
# makes private (static) procedures and variables public,
# so they are visible to the debugger and profiler.
# No execution time or space penalty.
GENOPT=
# Choose capability options.
# -DHAVE_MKSTEMP
# uses mkstemp instead of mktemp
# This gets rid of several security warnings that look
# ominous. Enable this if you wish to get rid of them.
CAPOPT= @HAVE_MKSTEMP@ @HAVE_HYPOT@
# Define the name of the executable file.
GS=@GS@@EXEEXT@
# Define the name of a pre-built executable that can be invoked at build
# time. Currently, this is only needed for compiled fonts. The usual
# alternatives are:
# - the standard name of Ghostscript on your system (typically `gs'):
BUILD_TIME_GS=gs
# - the name of the executable you are building now. If you choose this
# option, then you must build the executable first without compiled fonts,
# and then again with compiled fonts.
#BUILD_TIME_GS=$(BINDIR)/$(GS) -I$(PSLIBDIR)
# Define the directories for debugging and profiling binaries, relative to
# the standard binaries.
DEBUGRELDIR=../debugobj
PGRELDIR=../pgobj
# Define the directory where the IJG JPEG library sources are stored,
# and the major version of the library that is stored there.
# You may need to change this if the IJG library version changes.
# See jpeg.mak for more information.
JSRCDIR=@LIBJPEGDIR@
JVERSION=6
# Note: if a shared library is used, it may not contain the
# D_MAX_BLOCKS_IN_MCU patch, and thus may not be able to read
# some older JPEG streams that violate the standard. If the JPEG
# library built from local sources, the patch will be applied.
SHARE_JPEG=@SHARE_LIBJPEG@
JPEG_NAME=jpeg
# Define the directory where the PNG library sources are stored,
# and the version of the library that is stored there.
# You may need to change this if the libpng version changes.
# See libpng.mak for more information.
SHARE_LIBPNG=@SHARE_LIBPNG@
PSRCDIR=@LIBPNGDIR@
LIBPNG_NAME=png
# Define the directory where the zlib sources are stored.
# See zlib.mak for more information.
SHARE_ZLIB=@SHARE_ZLIB@
ZSRCDIR=@ZLIBDIR@
#ZLIB_NAME=gz
ZLIB_NAME=z
# Choose shared or compiled in libjbig2dec and source location
SHARE_JBIG2=@SHARE_JBIG2@
JBIG2SRCDIR=@JBIG2DIR@
# Choose shared of compiled in libjasper (JPXDecode support) and source location
SHARE_JASPER=@SHARE_JASPER@
JASPERSRCDIR=@JASPERDIR@
JASPERCFLAGS=-DJAS_CONFIGURE
# Define the directory where the icclib source are stored.
# See icclib.mak for more information
ICCSRCDIR=icclib
# Define the directory where the ijs source is stored,
# and the process forking method to use for the server.
# See ijs.mak for more information.
IJSSRCDIR=@IJSDIR@
IJSEXECTYPE=unix
# Define how to build the library archives. (These are not used in any
# standard configuration.)
AR=ar
ARFLAGS=qc
RANLIB=@RANLIB@
# ------ Platform-specific options ------ #
# Define the name of the C compiler.
CC=@CC@
# Define the name of the linker for the final link step.
# Normally this is the same as the C compiler.
CCLD=$(CC)
# Define the default gcc flags.
GCFLAGS=@CPPFLAGS@ @GCFLAGS@ @CFLAGS@
# Define the added flags for standard, debugging, profiling
# and shared object builds.
CFLAGS_STANDARD=@OPT_CFLAGS@
CFLAGS_DEBUG=-g -O
CFLAGS_PROFILE=-pg @OPT_CFLAGS@
CFLAGS_SO=-fPIC
# Define the other compilation flags. Add at most one of the following:
# -DBSD4_2 for 4.2bsd systems.
# -DSYSV for System V or DG/UX.
# -DSYSV -D__SVR3 for SCO ODT, ISC Unix 2.2 or before,
# or any System III Unix, or System V release 3-or-older Unix.
# -DSVR4 -DSVR4_0 (not -DSYSV) for System V release 4.0.
# -DSVR4 (not -DSYSV) for System V release 4.2 (or later) and Solaris 2.
# XCFLAGS can be set from the command line.
# We don't include -ansi, because this gets in the way of the platform-
# specific stuff that <math.h> typically needs; nevertheless, we expect
# gcc to accept ANSI-style function prototypes and function definitions.
XCFLAGS=
# defines from autoconf; note that we don't use these at present.
ACDEFS=@DEFS@
CFLAGS=$(CFLAGS_STANDARD) $(GCFLAGS) $(XCFLAGS)
# Define platform flags for ld.
# SunOS 4.n may need -Bstatic.
# Solaris 2.6 (and possibly some other versions) with any of the SHARE_
# parameters set to 1 may need
# -R /usr/local/xxx/lib:/usr/local/lib
# giving the full path names of the shared library directories.
# XLDFLAGS can be set from the command line.
XLDFLAGS=
LDFLAGS=@LDFLAGS@ $(XLDFLAGS)
# Define any extra libraries to link into the executable.
# ISC Unix 2.2 wants -linet.
# SCO Unix needs -lsocket if you aren't including the X11 driver.
# SVR4 may need -lnsl.
# Solaris may need -lnsl -lsocket -lposix4.
# (Libraries required by individual drivers are handled automatically.)
EXTRALIBS=
# Define the standard libraries to search at the end of linking.
# Most platforms require -lpthread for the POSIX threads library;
# on FreeBSD, change -lpthread to -lc_r; BSDI and perhaps some others
# include pthreads in libc and don't require any additional library.
# All reasonable platforms require -lm, but Rhapsody and perhaps one or
# two others fold libm into libc and don't require any additional library.
#STDLIBS=-lpthread -lm
# Since the default build is for nosync, don't include pthread lib
STDLIBS=-lm
# Define the include switch(es) for the X11 header files.
# This can be null if handled in some other way (e.g., the files are
# in /usr/include, or the directory is supplied by an environment variable)
XINCLUDE=@X_CFLAGS@
# Define the directory/ies and library names for the X11 library files.
# XLIBDIRS is for ld and should include -L; XLIBDIR is for LD_RUN_PATH
# (dynamic libraries on SVR4) and should not include -L.
# Newer SVR4 systems can use -R in XLIBDIRS rather than setting XLIBDIR.
# Both can be null if these files are in the default linker search path.
# Solaris and other SVR4 systems with dynamic linking probably want
#XLIBDIRS=-L/usr/openwin/lib -R/usr/openwin/lib
# X11R6 (on any platform) may need
#XLIBS=Xt SM ICE Xext X11
# We use the autoconf macro AC_PATH_XTRA which defines X_LIBS with
# the -L (or whatever). It also defines X_PRE_LIBS and X_EXTRA_LIBS
# all three of which are stripped and slotted into XLIBS below.
# Usually however, all but X_LIBS are empty on modern platforms.
XLIBDIRS=@X_LIBS@
XLIBDIR=
#XLIBS=Xt Xext X11
XLIBS=@XLIBS@
# Define whether this platform has floating point hardware:
# FPU_TYPE=2 means floating point is faster than fixed point.
# (This is the case on some RISCs with multiple instruction dispatch.)
# FPU_TYPE=1 means floating point is at worst only slightly slower
# than fixed point.
# FPU_TYPE=0 means that floating point may be considerably slower.
# FPU_TYPE=-1 means that floating point is always much slower than
# fixed point.
FPU_TYPE=1
# Define the .dev module that implements thread and synchronization
# primitives for this platform.
# If POSIX sync primitives are used, also change the STDLIBS to include
# the pthread library.
#SYNC=posync
# Default is No sync primitives since some platforms don't have it (HP-UX)
SYNC=nosync
# ------ Devices and features ------ #
# Choose the language feature(s) to include. See gs.mak for details.
FEATURE_DEVS=$(PSD)psl3.dev $(PSD)pdf.dev $(PSD)dpsnext.dev $(PSD)ttfont.dev $(PSD)epsf.dev $(GLD)pipe.dev $(PSD)fapi.dev @JBIG2DEVS@ @JPXDEVS@
#FEATURE_DEVS=$(PSD)psl3.dev $(PSD)pdf.dev
#FEATURE_DEVS=$(PSD)psl3.dev $(PSD)pdf.dev $(PSD)dpsnext.dev $(PSD)ttfont.dev $(PSD)rasterop.dev $(GLD)pipe.dev
# The following is strictly for testing.
FEATURE_DEVS_ALL=$(PSD)psl3.dev $(PSD)pdf.dev $(PSD)dpsnext.dev $(PSD)ttfont.dev $(PSD)rasterop.dev $(PSD)double.dev $(PSD)trapping.dev $(PSD)stocht.dev $(GLD)pipe.dev $(GLD)romfs.dev @JBIG2DEVS@ @JPXDEVS@
#FEATURE_DEVS=$(FEATURE_DEVS_ALL)
# Choose whether to compile the .ps initialization files into the executable.
# See gs.mak for details.
COMPILE_INITS=@COMPILE_INITS@
# Choose whether to store band lists on files or in memory.
# The choices are 'file' or 'memory'.
BAND_LIST_STORAGE=file
# Choose which compression method to use when storing band lists in memory.
# The choices are 'lzw' or 'zlib'.
BAND_LIST_COMPRESSOR=zlib
# Choose the implementation of file I/O: 'stdio', 'fd', or 'both'.
# See gs.mak and sfxfd.c for more details.
FILE_IMPLEMENTATION=stdio
# Choose the implementation of stdio: '' for file I/O and 'c' for callouts
# See gs.mak and ziodevs.c/ziodevsc.c for more details.
STDIO_IMPLEMENTATION=c
# Override the default device. This is set to 'display' by
# unix-dll.mak when building a shared object.
DISPLAY_DEV=
# Define the name table capacity size of 2^(16+n).
# Setting this to a non-zero value will slow down the interpreter.
EXTEND_NAMES=0
# Choose the device(s) to include. See devs.mak for details,
# devs.mak and contrib.mak for the list of available devices.
#DEVICE_DEVS=$(DISPLAY_DEV) $(DD)x11.dev $(DD)x11alpha.dev $(DD)x11cmyk.dev $(DD)x11gray2.dev $(DD)x11gray4.dev $(DD)x11mono.dev
DEVICE_DEVS=$(DISPLAY_DEV) @X11DEVS@
DEVICE_DEVS1=$(DD)bmpmono.dev $(DD)bmpgray.dev $(DD)bmpsep1.dev $(DD)bmpsep8.dev $(DD)bmp16.dev $(DD)bmp256.dev $(DD)bmp16m.dev $(DD)bmp32b.dev
DEVICE_DEVS2=#$(DD)rinkj.dev
DEVICE_DEVS3=$(DD)deskjet.dev $(DD)djet500.dev $(DD)laserjet.dev $(DD)ljetplus.dev $(DD)ljet2p.dev $(DD)ljet3.dev $(DD)ljet3d.dev $(DD)ljet4.dev $(DD)ljet4d.dev $(DD)lj5mono.dev $(DD)lj5gray.dev
DEVICE_DEVS4=$(DD)cdeskjet.dev $(DD)cdjcolor.dev $(DD)cdjmono.dev $(DD)cdj550.dev $(DD)pj.dev $(DD)pjxl.dev $(DD)pjxl300.dev
DEVICE_DEVS5=$(DD)uniprint.dev @IJSDEVS@
DEVICE_DEVS6=$(DD)bj10e.dev $(DD)bj200.dev $(DD)bjc600.dev $(DD)bjc800.dev
DEVICE_DEVS7=$(DD)faxg3.dev $(DD)faxg32d.dev $(DD)faxg4.dev
DEVICE_DEVS8=$(DD)pcxmono.dev $(DD)pcxgray.dev $(DD)pcx16.dev $(DD)pcx256.dev $(DD)pcx24b.dev $(DD)pcxcmyk.dev
DEVICE_DEVS9=$(DD)pbm.dev $(DD)pbmraw.dev $(DD)pgm.dev $(DD)pgmraw.dev $(DD)pgnm.dev $(DD)pgnmraw.dev $(DD)pnm.dev $(DD)pnmraw.dev $(DD)ppm.dev $(DD)ppmraw.dev $(DD)pkm.dev $(DD)pkmraw.dev $(DD)pksm.dev $(DD)pksmraw.dev
DEVICE_DEVS10=$(DD)tiffcrle.dev $(DD)tiffg3.dev $(DD)tiffg32d.dev $(DD)tiffg4.dev $(DD)tifflzw.dev $(DD)tiffpack.dev
DEVICE_DEVS11=$(DD)tiff12nc.dev $(DD)tiff24nc.dev $(DD)tiffgray.dev $(DD)tiff32nc.dev $(DD)tiffsep.dev
DEVICE_DEVS12=$(DD)psmono.dev $(DD)psgray.dev $(DD)psrgb.dev $(DD)bit.dev $(DD)bitrgb.dev $(DD)bitcmyk.dev
#DEVICE_DEVS13=$(DD)pngmono.dev $(DD)pnggray.dev $(DD)png16.dev $(DD)png256.dev $(DD)png16m.dev
DEVICE_DEVS13=@PNGDEVS@
DEVICE_DEVS14=$(DD)jpeg.dev $(DD)jpeggray.dev
DEVICE_DEVS15=$(DD)pdfwrite.dev $(DD)pswrite.dev $(DD)epswrite.dev $(DD)pxlmono.dev $(DD)pxlcolor.dev
DEVICE_DEVS16=$(DD)bbox.dev
DEVICE_DEVS17=
DEVICE_DEVS18=
DEVICE_DEVS19=
DEVICE_DEVS20=$(DD)cljet5.dev $(DD)cljet5c.dev
DEVICE_DEVS21=$(DD)spotcmyk.dev $(DD)devicen.dev $(DD)xcf.dev $(DD)psdcmyk.dev $(DD)psdrgb.dev
# ---------------------------- End of options --------------------------- #
# Define the name of the partial makefile that specifies options --
# used in dependencies.
MAKEFILE=Makefile
TOP_MAKEFILES=$(MAKEFILE) $(GLSRCDIR)/unixhead.mak
# Define the auxiliary program dependency. We don't use this.
AK=
# Define the compilation rules and flags.
CCFLAGS=$(GENOPT) $(CAPOPT) $(CFLAGS)
CC_=$(CC) $(CCFLAGS)
CCAUX=$(CC) $(GCFLAGS)
# These are the specific warnings we have to turn off to compile those
# specific few files that need this. We may turn off others in the future.
CC_NO_WARN=$(CC_)
# ---------------- End of platform-specific section ---------------- #
include $(GLSRCDIR)/unixhead.mak
include $(GLSRCDIR)/gs.mak
include $(GLSRCDIR)/lib.mak
include $(PSSRCDIR)/int.mak
include $(PSSRCDIR)/cfonts.mak
include $(GLSRCDIR)/jpeg.mak
# zlib.mak must precede libpng.mak
include $(GLSRCDIR)/zlib.mak
include $(GLSRCDIR)/libpng.mak
include $(GLSRCDIR)/jbig2.mak
include $(GLSRCDIR)/jasper.mak
include $(GLSRCDIR)/icclib.mak
include $(GLSRCDIR)/ijs.mak
include $(GLSRCDIR)/devs.mak
include $(GLSRCDIR)/contrib.mak
include $(GLSRCDIR)/unix-aux.mak
include $(GLSRCDIR)/unixlink.mak
include $(GLSRCDIR)/unix-dll.mak
include $(GLSRCDIR)/unix-end.mak
include $(GLSRCDIR)/unixinst.mak
# Clean up after the autotools scripts
# configure.ac and Makefile.in are symlinks from a subdir
# (created by autogen.sh) and so are safe to remove
distclean : clean config-clean
-$(RM_) -r $(BINDIR) $(GLOBJDIR) $(PSOBJDIR)
-$(RM_) -r autom4te.cache
-$(RM_) config.log config.status
-$(RM_) Makefile
maintainer-clean : distclean
-$(RM_) configure.ac
-$(RM_) configure
-$(RM_) Makefile.in
check : default
$(NO_OP)