Subversion Repositories planix.SVN

# /sys/lib/dist/pc/mkfile
<../defs

out=outside                     # outside web server
s=/sys/lib/dist/pc
x=`{bind -b /sys/lib/dist/bin/$cputype /bin}

default:V: cddisk

SUB=`{ls sub inst}
boot.raw:DQ: proto $SUB
        rfork n
        rm -rf boot
        mkdir boot
        bind /dev/null /sys/log/timesync
        # make files writable for now.
        sed 's!d000!d775!;s!000!664!;s!555!775!;s!444!664!' proto >proto.cp
        disk/mkfs -a proto.cp | disk/mkext -d boot
        @{
                cd boot/386
                strip init
                cd bin
                strip * */* >[2]/dev/null || status=''
        }
        sed 's!/.*!!' proto >proto.cp
        disk/mkfs -a -s boot proto.cp | tee >{wc -c >[1=2]} | 
                touchfs 1000000000 >$target

boot.bz2:DQ: boot.raw
        ls -l boot.raw
        bflz -n 32 <boot.raw >boot.bflz
        bzip2 -9 <boot.bflz >$target
        ls -l boot.bflz $target

root.bz2:DQ: boot.bz2
        {
                echo bzfilesystem
                cat boot.bz2
                dd -if /dev/zero -bs 1024 -count 1 >[2]/dev/null
        } >$target
        ls -l $target

/sys/src/9/pc/9pcflop.gz: root.bz2
        @{
                rfork n
                cd /sys/src/9/pc
                mk 'CONF=pcflop' 9pcflop.gz
        }

/sys/src/9/pc/9pccd.gz:
        @{
                cd /sys/src/9/pc
                mk 'CONF=pccd' 9pccd.gz
        }

# disk/format apparently uses stat to obtain a file's real name, so
# binding 9loadusb onto 9load will store the name 9loadusb in the
# generated fat filesystem.  the same is true for plan9.ini.cd and plan9.ini.

9load: /386/9load
        cp $prereq $target
        cp /386/9loaddebug 9loaddebug

# 9load no longer loads from floppies, and even if it did, this
# no longer works, since 9load+9pcflop.gz won't fit on a floppy:
#       disk/format: data does not fit on disk (2849 2849)
#ndisk: 9load /sys/src/9/pc/9pcflop.gz plan9.ini /lib/vgadb
#       dd -if /dev/zero -of ndisk -bs 1024 -count 1440 >[2]/dev/null
#       disk/format -f -b /386/pbs -d ndisk \
#               9load /sys/src/9/pc/9pcflop.gz plan9.ini /lib/vgadb
#       ls -l ndisk

# cannot list both 9pcflop.gz and 9pccd.gz because they cannot be built 
# in parallel.  stupid mk
cddisk:D: 9load /sys/src/9/pc/9pcflop.gz plan9.ini.cd /lib/vgadb
        mk -a /sys/src/9/pc/9pccd.gz
        mk -a /sys/src/9/pc/9pcflop.gz
        rfork n
        cp -x plan9.ini.cd subst/plan9.ini
        dd -if /dev/zero -of $target -bs 1024 -count 2880 >[2]/dev/null
        disk/format -t 3½QD -f -b /386/pbs -d $target \
                /sys/src/9/pc/^(9pcflop 9pccd)^.gz subst/plan9.ini /lib/vgadb
        ls -l $target

$scr/usbdisk:D: $scr/plan9.iso.bz2 /n/sources/plan9
        @ {
        rfork n
        if (~ $#scr 0 || ~ $scr '') {
                echo '$scr unset' >[1=2]
                exit not-set-up
        }
        cd $scr
        bind /dev/null /dev/cons
        bind /dev/null /dev/consctl
        { mkusbboot -s 1900 -r /n/sources/plan9; mv image $target } >[2=1] |
                grep -v 'mkfs: /sys/lib/sysconfig/proto/.*can''t stat'
        exit ''
        }
$scr/usbdisk.bz2:D: $scr/usbdisk
        @ {
        bzip2 <$prereq >$target && rm -f $prereq
        ls -l $target
        targsz = `{{ls -s $target; echo 0} | awk '{print $1; exit}'}
        if (test $targsz -lt 80000) {
                echo $target implausibly small: >[1=2]
                ls -l $target                   >[1=2]
                rm -f $target
                exit $target-too-small
        }
        exit ''
        }

clean:V:
        if (! unmount 9load >[2]/dev/null)
                ;
        rm -rf boot boot.bz2 boot.bflz boot.raw root.bz2 9pcflop ndisk 9load cddisk proto.cp 9loaddebug

install:V: 9loaddebug # ndisk
        9fs $out
        dst=/n/$out/sys/lib/dist/web.protect
        cp 9loaddebug $dst
        # gzip -9 <ndisk > $dst/plan9.flp.gz
        # mk clean

test:V: 9loaddebug # ndisk
        cp 9loaddebug ../web.protect2/n9loaddebug
        # cp ndisk ../web.protect2/ndisk

cd0:D:  cddisk
        rm -f cd0
        disk/mk9660 -9cj -v 'Plan 9 4th Edition' -s . -p cd0.proto -b cddisk cd0