Blame | Last modification | View Log | RSS feed
# Copyright (C) 1997-2002 artofcode LLC. All rights reserved.
#
# This software is provided AS-IS with no warranty, either express or
# implied.
#
# This software is distributed under license and may not be copied,
# modified or distributed except as expressly authorized under the terms
# of the license contained in the file LICENSE in this distribution.
#
# For more information about licensing, please refer to
# http://www.ghostscript.com/licensing/. For information on
# commercial licensing, go to http://www.artifex.com/licensing/ or
# contact Artifex Software, Inc., 101 Lucas Valley Road #110,
# San Rafael, CA 94903, U.S.A., +1(415)492-9861.
# $Id: openvms.mak,v 1.41 2005/08/31 05:52:32 ray Exp $
# makefile for OpenVMS VAX and Alpha
#
# Please contact Jim Dunham (dunham@omtool.com) if you have questions.
# Support for VAX C on OpenVMS was removed in release 6.01 by Aladdin:
# DEC C is now used on both VAX and Alpha platforms.
#
# ------------------------------- Options ------------------------------- #
###### This section is the only part of the file you should need to edit.
# on the make command line specify:
# make -fopenvms.mak "OPENVMS={VAX,ALPHA}" "DECWINDOWS={1.2,<blank>}"
# Define the directory for the final executable, and the
# source, generated intermediate file, and object directories
# for the graphics library (GL) and the PostScript/PDF interpreter (PS).
# NOTE: If you use GNU make, GLGENDIR and PSGENDIR must not be the
# current directory ([]).
BINDIR=[.bin]
GLSRCDIR=[.src]
GLGENDIR=[.obj]
GLOBJDIR=[.obj]
PSSRCDIR=[.src]
PSLIBDIR=[.lib]
PSGENDIR=[.obj]
PSOBJDIR=[.obj]
# Because of OpenVMS syntactic problems, the following redundant definitions
# are necessary. If you are using more than one GENDIR and/or OBJDIR,
# you will have to edit the code below that creates these directories.
BIN_DIR=BIN.DIR
OBJ_DIR=OBJ.DIR
# Do not edit the next group of lines.
#include $(COMMONDIR)/vmscdefs.mak
#include $(COMMONDIR)/vmsdefs.mak
#include $(COMMONDIR)/generic.mak
include $(GLSRCDIR)version.mak
DD=$(GLGENDIR)
GLD=$(GLGENDIR)
PSD=$(PSGENDIR)
# ------ Generic options ------ #
# Define the directory that will hold documentation at runtime.
GS_DOCDIR=GS_DOC
#GS_DOCDIR=SYS$COMMON:[GS]
# Define the default directory/ies for the runtime
# initialization and font files. Separate multiple directories with ,.
GS_LIB_DEFAULT=GS_ROOT:[LIB],GS_ROOT:[RESOURCE],GS_ROOT:[FONT]
# Define whether or not searching for initialization files should always
# look in the current directory first. This leads to well-known security
# and confusion problems, but users insist on it.
# NOTE: this also affects searching for files named on the command line:
# see the "File searching" section of Use.htm for full details.
# Because of this, setting SEARCH_HERE_FIRST to 0 is not recommended.
SEARCH_HERE_FIRST=1
# Define the name of the interpreter initialization file.
# (There is no reason to change this.)
GS_INIT=GS_INIT.PS
# Choose generic configuration options.
# Setting DEBUG=1 includes debugging features in the code
DEBUG=
# Setting TDEBUG=1 includes symbol table information for the debugger,
# and also enables stack tracing on failure.
TDEBUG=
# Setting CDEBUG=1 enables 'C' compiler debugging and turns off optimization
# Code is substantially slower and larger.
CDEBUG=
# Define the name of the executable file.
GS=GS
# Define the name of a pre-built executable that can be invoked at build
# time. Currently, this is only needed for compiled fonts. The usual
# alternatives are:
# - the standard name of Ghostscript on your system (typically `gs'):
BUILD_TIME_GS=GS
# - the name of the executable you are building now. If you choose this
# option, then you must build the executable first without compiled fonts,
# and then again with compiled fonts.
#BUILD_TIME_GS=$(BINDIR)$(GS) -I$(PSLIBDIR)
# Define the directory where the IJG JPEG library sources are stored,
# and the major version of the library that is stored there.
# You may need to change this if the IJG library version changes.
# See jpeg.mak for more information.
JSRCDIR=[.jpeg-6b]
JVERSION=6
# Define the directory where the PNG library sources are stored,
# and the version of the library that is stored there.
# You may need to change this if the libpng version changes.
# See libpng.mak for more information.
PSRCDIR=[.libpng-1_2_8]
PVERSION=10208
# Define the directory where the zlib sources are stored.
# See zlib.mak for more information.
ZSRCDIR=[.zlib-1_2_1]
# Define the jbig2dec library source location.
# See jbig2.mak for more information.
JBIG2SRCDIR=[.jbig2dec-0_7]
# Define the directory where the icclib source are stored.
# See icclib.mak for more information
ICCSRCDIR=[.icclib]
# IJS has not been ported to OpenVMS. If you do the port,
# you'll need to set these values. You'll also need to
# include the ijs.mak makefile (right after icclib.mak).
#
# Define the directory where the ijs source is stored,
# and the process forking method to use for the server.
# See ijs.mak for more information.
#IJSSRCDIR=[.ijs]
#IJSEXECTYPE=unix
# Note that built-in third-party libraries aren't available.
SHARE_JPEG=0
SHARE_LIBPNG=0
SHARE_ZLIB=0
SHARE_JBIG2=0
# Define the path to X11 include files
X_INCLUDE=DECW$$INCLUDE
# ------ Platform-specific options ------ #
# Define the drive, directory, and compiler name for the 'C' compiler.
# COMP is the full compiler path name.
COMP=CC
ifdef DEBUG
COMP:=$(COMP)/DEBUG/NOOPTIMIZE
else
# This should include /OPTIMIZE, but some OpenVMS compilers have an
# optimizer bug that causes them to generate incorrect code for gdevpsfx.c,
# so we must disable optimization. (Eventually we will check for the bug
# in genarch and enable optimization if it is safe.)
#COMP:=$(COMP)/NODEBUG/OPTIMIZE
COMP:=$(COMP)/NODEBUG/NOOPTIMIZE
endif
COMP:=$(COMP)/DECC/PREFIX=ALL/NESTED_INCLUDE=PRIMARY/NAMES=SHORTENED
# Define any other compilation flags.
# Including defines for A4 paper size
ifdef A4_PAPER
COMP:=$(COMP)/DEFINE=("A4")
endif
# LINK is the full linker path name
ifdef TDEBUG
LINKER=LINK/DEBUG/TRACEBACK
else
LINKER=LINK/NODEBUG/NOTRACEBACK
endif
# INCDIR contains the include files
INCDIR=
# LIBDIR contains the library files
LIBDIR=
# Define the .dev module that implements thread and synchronization
# primitives for this platform. Don't change this unless you really know
# what you're doing.
SYNC=posync
# ------ Devices and features ------ #
# Choose the device(s) to include. See devs.mak for details,
# devs.mak and contrib.mak for the list of available devices.
DEVICE_DEVS=$(DD)x11.dev $(DD)x11alpha.dev $(DD)x11cmyk.dev $(DD)x11gray2.dev $(DD)x11gray4.dev $(DD)x11mono.dev
DEVICE_DEVS1=
DEVICE_DEVS2=
DEVICE_DEVS3=$(DD)deskjet.dev $(DD)djet500.dev $(DD)laserjet.dev $(DD)ljetplus.dev $(DD)ljet2p.dev $(DD)ljet3.dev $(DD)ljet3d.dev $(DD)ljet4.dev $(DD)ljet4d.dev
DEVICE_DEVS4=$(DD)cdeskjet.dev $(DD)cdjcolor.dev $(DD)cdjmono.dev $(DD)cdj550.dev $(DD)pj.dev $(DD)pjxl.dev $(DD)pjxl300.dev
DEVICE_DEVS5=$(DD)uniprint.dev
DEVICE_DEVS6=$(DD)bj10e.dev $(DD)bj200.dev $(DD)bjc600.dev $(DD)bjc800.dev
DEVICE_DEVS7=$(DD)faxg3.dev $(DD)faxg32d.dev $(DD)faxg4.dev
DEVICE_DEVS8=$(DD)pcxmono.dev $(DD)pcxgray.dev $(DD)pcx16.dev $(DD)pcx256.dev $(DD)pcx24b.dev $(DD)pcxcmyk.dev
DEVICE_DEVS9=$(DD)pbm.dev $(DD)pbmraw.dev $(DD)pgm.dev $(DD)pgmraw.dev $(DD)pgnm.dev $(DD)pgnmraw.dev
DEVICE_DEVS10=$(DD)tiffcrle.dev $(DD)tiffg3.dev $(DD)tiffg32d.dev $(DD)tiffg4.dev $(DD)tifflzw.dev $(DD)tiffpack.dev
DEVICE_DEVS11=$(DD)tiff12nc.dev $(DD)tiff24nc.dev $(DD)tiffgray.dev $(DD)tiff32nc.dev $(DD)tiffsep.dev
DEVICE_DEVS12=$(DD)psmono.dev $(DD)psgray.dev $(DD)psrgb.dev $(DD)bit.dev $(DD)bitrgb.dev $(DD)bitcmyk.dev
DEVICE_DEVS13=$(DD)pngmono.dev $(DD)pnggray.dev $(DD)png16.dev $(DD)png256.dev $(DD)png16m.dev $(DD)pngalpha.dev
DEVICE_DEVS14=$(DD)jpeg.dev $(DD)jpeggray.dev $(DD)jpegcmyk.dev
DEVICE_DEVS15=$(DD)pdfwrite.dev $(DD)pswrite.dev $(DD)ps2write.dev $(DD)epswrite.dev $(DD)pxlmono.dev $(DD)pxlcolor.dev
DEVICE_DEVS16=$(DD)bbox.dev
# Overflow from DEVS9
DEVICE_DEVS17=$(DD)pnm.dev $(DD)pnmraw.dev $(DD)ppm.dev $(DD)ppmraw.dev $(DD)pkm.dev $(DD)pkmraw.dev $(DD)pksm.dev $(DD)pksmraw.dev
DEVICE_DEVS18=
DEVICE_DEVS19=
DEVICE_DEVS20=
DEVICE_DEVS21=
# Choose the language feature(s) to include. See gs.mak for details.
FEATURE_DEVS=$(PSD)psl3.dev $(PSD)pdf.dev $(PSD)dpsnext.dev $(PSD)ttfont.dev $(PSD)epsf.dev $(PSD)fapi.dev
# Choose whether to compile the .ps initialization files into the executable.
# See gs.mak for details.
COMPILE_INITS=0
# Choose whether to store band lists on files or in memory.
# The choices are 'file' or 'memory'.
BAND_LIST_STORAGE=file
# Choose which compression method to use when storing band lists in memory.
# The choices are 'lzw' or 'zlib'.
BAND_LIST_COMPRESSOR=zlib
# Choose the implementation of file I/O: 'stdio', 'fd', or 'both'.
# See gs.mak and sfxfd.c for more details.
FILE_IMPLEMENTATION=stdio
# Choose the implementation of stdio: '' for file I/O and 'c' for callouts
# See gs.mak and ziodevs.c/ziodevsc.c for more details.
STDIO_IMPLEMENTATION=c
# Define the name table capacity size of 2^(16+n).
EXTEND_NAMES=0
# Define whether the system constants are writable.
SYSTEM_CONSTANTS_ARE_WRITABLE=0
# Define the platform name.
PLATFORM=openvms_
# Define the name of the makefile -- used in dependencies.
MAKEFILE=$(GLSRCDIR)openvms.mak
TOP_MAKEFILES=$(MAKEFILE)
# Define the platform options
PLATOPT=
# Patch a couple of PC-specific things that aren't relevant to OpenVMS builds,
# but that cause `make' to produce warnings.
PCFBASM=
# It is very unlikely that anyone would want to edit the remaining
# symbols, but we describe them here for completeness:
# Define the suffix for command files (e.g., null or .bat).
CMD=
# Define the directory separator character (\ for MS-DOS, / for Unix,
# nothing for OpenVMS).
D=
# Define the brackets for passing preprocessor definitions to the C compiler.
NULL=
D_=/DEFINE="
_D_=$(NULL)=
_D="
# Define the syntax of search paths for the C compiler.
# The OpenVMS compilers uses /INCLUDE=(dir1, dir2, ...dirn),
# and only a single /INCLUDE switch is allowed in the command line.
I_=/INCLUDE=(
II=,
_I=)
# Define the string for specifying the output file from the C compiler.
O_=/OBJECT=
# Define the quoting string for mixed-case arguments.
# (OpenVMS is the only platform where this isn't an empty string.)
Q="
# Define the extension for executable files (e.g., null or .exe).
XE=.exe
# Define the extension for executable files for the auxiliary programs
# (e.g., null or .exe).
XEAUX=.exe
# Define the list of files that `make clean' removes.
BEGINFILES=$(GLGENDIR)OPENVMS.OPT $(GLGENDIR)OPENVMS.COM
# Define the C invocation for auxiliary programs (echogs, genarch).
CCAUX=CC/DECC
# Define the C invocation for normal compilation.
CC=$(COMP)
# Define the Link invocation.
LINK=$(LINKER)/EXE=$@ $^,$(GLGENDIR)OPENVMS.OPT/OPTION
# Define the auxiliary program dependency. We don't need this.
AK=
# Define the syntax for command, object, and executable files.
OBJ=obj
# Define the prefix for image invocations.
EXP=MCR $(NULL)
# Define the prefix for shell invocations.
SH=
# Define generic commands.
CP_=$$ @$(GLSRCDIR)COPY_ONE
# Define the command for deleting (a) file(s) (including wild cards)
RM_=$$ @$(GLSRCDIR)RM_ONE
# Define the command for deleting multiple files / patterns.
RMN_=$$ @$(GLSRCDIR)RM_ALL
# Define the arguments for genconf.
CONFILES=-p %s
CONFLDTR=-o
# Define the generic compilation rules.
..suffixes: .c .obj .exe
..obj.exe:
$(LINK)
# ---------------------------- End of options ---------------------------- #
# Define the default build rule, so the object directories get created
# automatically.
# I wasn't able to find a "do nothing" command in the DCL manual!
std: STDDIRS default
WRITE SYS$$OUTPUT "Done."
STDDIRS:
$$ If F$$Search("$(BIN_DIR)") .EQS. "" Then Create/Directory/Log $(BINDIR)
$$ If F$$Search("$(OBJ_DIR)") .EQS. "" Then Create/Directory/Log $(GLOBJDIR)
# ------------------- Include the generic makefiles ---------------------- #
#include $(COMMONDIR)/ansidefs.mak
#include $(COMMONDIR)/vmsdefs.mak
#include $(COMMONDIR)/generic.mak
include $(GLSRCDIR)gs.mak
include $(GLSRCDIR)lib.mak
include $(PSSRCDIR)int.mak
include $(PSSRCDIR)cfonts.mak
include $(GLSRCDIR)jpeg.mak
# zlib.mak must precede libpng.mak
include $(GLSRCDIR)zlib.mak
include $(GLSRCDIR)libpng.mak
include $(GLSRCDIR)jbig2.mak
include $(GLSRCDIR)icclib.mak
include $(GLSRCDIR)devs.mak
include $(GLSRCDIR)contrib.mak
# Define various incantations of the 'c' compiler.
CC_=$(COMP)
CC_INT=$(CC_)
CC_NO_WARN=$(CC_)
# ----------------------------- Main program ------------------------------ #
$(GS_XE) : openvms $(GLOBJDIR)gs.$(OBJ) $(INT_ALL) $(LIB_ALL)
$(LINKER)/EXE=$@ $(GLOBJ)gs.$(OBJ),$(ld_tr)/OPTIONS,$(GLGENDIR)OPENVMS.OPT/OPTION
# OpenVMS.dev
openvms__=$(GLOBJ)gp_getnv.$(OBJ) $(GLOBJ)gp_vms.$(OBJ) $(GLOBJ)gp_stdia.$(OBJ)
$(GLGEN)openvms_.dev : $(openvms__) $(GLGEN)nosync.dev
$(SETMOD) $(GLGEN)openvms_ $(openvms__) -include $(GLGEN)nosync
$(GLOBJ)gp_vms.$(OBJ) : $(GLSRC)gp_vms.c $(string__h) $(memory__h) $(gx_h) $(gp_h) $(gpmisc_h) $(gsstruct_h)
$(CC_)/include=($(GLGENDIR),$(GLSRCDIR))/obj=$(GLOBJ)gp_vms.$(OBJ) $(GLSRC)gp_vms.c
$(GLOBJ)gp_stdia.$(OBJ): $(GLSRC)gp_stdia.c $(AK) $(stdio__h) $(time__h) $(unistd__h) $(gx_h) $(gp_h)
$(CC_)/obj=$(GLOBJ)gp_stdia.$(OBJ) $(GLSRC)gp_stdia.c
# Interpreter AUX programs
$(ECHOGS_XE) : $(GLOBJ)echogs.$(OBJ)
LINK/EXE=$@ $(GLOBJ)echogs.$(OBJ)
$(GLOBJ)echogs.$(OBJ) : $(GLSRC)echogs.c
$(CCAUX)/obj=$(GLOBJ)echogs.$(OBJ) $(GLSRC)echogs.c
$(GENARCH_XE) : $(GLOBJ)genarch.$(OBJ)
LINK/EXE=$@ $(GLOBJ)genarch.$(OBJ)
$(GLOBJ)genarch.$(OBJ) : $(GLSRC)genarch.c $(GENARCH_DEPS)
$(CCAUX)/obj=$(GLOBJ)genarch.$(OBJ) $(GLSRC)genarch.c
$(GENCONF_XE) : $(GLOBJDIR)genconf.$(OBJ)
LINK/EXE=$@ $(GLOBJ)genconf.$(OBJ)
$(GLOBJ)genconf.$(OBJ) : $(GLSRC)genconf.c $(GENCONF_DEPS)
$(CCAUX)/obj=$(GLOBJ)genconf.$(OBJ) $(GLSRC)genconf.c
$(GENDEV_XE) : $(GLOBJDIR)gendev.$(OBJ)
LINK/EXE=$@ $(GLOBJ)gendev.$(OBJ)
$(GLOBJ)gendev.$(OBJ) : $(GLSRC)gendev.c $(GENDEV_DEPS)
$(CCAUX)/obj=$(GLOBJ)gendev.$(OBJ) $(GLSRC)gendev.c
$(GENHT_XE) : $(GLOBJDIR)genht.$(OBJ)
LINK/EXE=$@ $(GLOBJ)genht.$(OBJ)
$(GLOBJ)genht.$(OBJ) : $(GLSRC)genht.c $(GENHT_DEPS)
$(CCAUX)/obj=$(GLOBJ)genht.$(OBJ) $(GENHT_CFLAGS) $(GLSRC)genht.c
$(GENINIT_XE) : $(GLOBJDIR)geninit.$(OBJ)
LINK/EXE=$@ $(GLOBJ)geninit.$(OBJ)
$(GLOBJ)geninit.$(OBJ) : $(GLSRC)geninit.c $(GENINIT_DEPS)
$(CCAUX)/obj=$(GLOBJ)geninit.$(OBJ) $(GLSRC)geninit.c
# Preliminary definitions
openvms : $(GLGENDIR)openvms.com $(GLGENDIR)openvms.opt
$$ @$(GLGENDIR)OPENVMS
$(GLGENDIR)openvms.com : $(GLSRCDIR)append_l.com
$$ @$(GLSRCDIR)APPEND_L $@ "$$ DEFINE/JOB X11 $(X_INCLUDE)"
$$ @$(GLSRCDIR)APPEND_L $@ "$$ DEFINE/JOB GS_LIB ''F$$ENVIRONMENT(""DEFAULT"")'"
$$ @$(GLSRCDIR)APPEND_L $@ "$$ DEFINE/JOB GS_DOC ''F$$ENVIRONMENT(""DEFAULT"")'"
$$ @$(GLSRCDIR)APPEND_L $@ "$$ DEFINE/JOB DECC$$USER_INCLUDE ''F$$ENVIRONMENT(""DEFAULT"")', DECW$$INCLUDE, DECC$$LIBRARY_INCLUDE, SYS$$LIBRARY"
$$ @$(GLSRCDIR)APPEND_L $@ "$$ DEFINE/JOB DECC$$SYSTEM_INCLUDE ''F$$ENVIRONMENT(""DEFAULT"")', DECW$$INCLUDE, DECC$$LIBRARY_INCLUDE, SYS$$LIBRARY"
$$ @$(GLSRCDIR)APPEND_L $@ "$$ DEFINE/JOB SYS "DECC$$LIBRARY_INCLUDE,SYS$$LIBRARY"
$(GLGENDIR)openvms.opt:
ifeq "$(DECWINDOWS)" "1.2"
$$ @$(GLSRCDIR)APPEND_L $@ "SYS$$SHARE:DECW$$XMLIBSHR12.EXE/SHARE"
$$ @$(GLSRCDIR)APPEND_L $@ "SYS$$SHARE:DECW$$XTLIBSHRR5.EXE/SHARE"
$$ @$(GLSRCDIR)APPEND_L $@ "SYS$$SHARE:DECW$$XLIBSHR.EXE/SHARE"
else
$$ @$(GLSRCDIR)APPEND_L $@ "SYS$$SHARE:DECW$$XMLIBSHR.EXE/SHARE"
$$ @$(GLSRCDIR)APPEND_L $@ "SYS$$SHARE:DECW$$XTSHR.EXE/SHARE"
$$ @$(GLSRCDIR)APPEND_L $@ "SYS$$SHARE:DECW$$XLIBSHR.EXE/SHARE"
endif
$$ @$(GLSRCDIR)APPEND_L $@ ""Ident="""""GS $(GS_DOT_VERSION)"""""
# The platform-specific makefiles must also include rules for creating
# certain dynamically generated files:
# gconfig_.h - this indicates the presence or absence of
# certain system header files that are located in different
# places on different systems. (It could be generated by
# the GNU `configure' program.)
# gconfigv.h - this indicates the status of certain machine-
# and configuration-specific features derived from definitions
# in the platform-specific makefile.
$(gconfig__h) : $(TOP_MAKEFILES) $(ECHOGS_XE)
$(EXP)$(ECHOGS_XE) -w $(gconfig__h) -x 23 define "HAVE_SYS_TIME_H"
$(gconfigv_h) : $(TOP_MAKEFILES) $(ECHOGS_XE)
$(EXP)$(ECHOGS_XE) -w $(gconfigv_h) -x 23 define "USE_ASM" 0
$(EXP)$(ECHOGS_XE) -a $(gconfigv_h) -x 23 define "USE_FPU" 1
$(EXP)$(ECHOGS_XE) -a $(gconfigv_h) -x 23 define "EXTEND_NAMES" 0$(EXTEND_NAMES)
$(EXP)$(ECHOGS_XE) -a $(gconfigv_h) -x 23 define "SYSTEM_CONSTANTS_ARE_WRITABLE" 0$(SYSTEM_CONSTANTS_ARE_WRITABLE)