Subversion Repositories planix.SVN

Rev

Rev 105 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | RSS feed

/*
 * Copyright (c) 1980 Regents of the University of California.
 * All rights reserved.  The Berkeley software License Agreement
 * specifies the terms and conditions for redistribution.
 */

#if     !defined(lint) && defined(DOSCCS)
static char *sccsid = "@(#)ex_unix.c    7.6 (Berkeley) 10/22/85";
#endif

#include "ex.h"
#include "ex_temp.h"
#include "ex_tty.h"
#include "ex_vis.h"

/*
 * Unix escapes, filtering
 */

/*
 * First part of a shell escape,
 * parse the line, expanding # and % and ! and printing if implied.
 */
unix0(warn)
        bool warn;
{
        register char *up, *fp;
        register short c;
        char printub, puxb[UXBSIZE + sizeof (int)];

        printub = 0;
        CP(puxb, uxb);
        c = getchar();
        if (c == '\n' || c == EOF)
                error("Incomplete shell escape command@- use 'shell' to get a shell");
        up = uxb;
        do {
                switch (c) {

                case '\\':
                        if (any(peekchar(), "%#!"))
                                c = getchar();
                default:
                        if (up >= &uxb[UXBSIZE]) {
tunix:
                                uxb[0] = 0;
                                error("Command too long");
                        }
                        *up++ = c;
                        break;

                case '!':
                        fp = puxb;
                        if (*fp == 0) {
                                uxb[0] = 0;
                                error("No previous command@to substitute for !");
                        }
                        printub++;
                        while (*fp) {
                                if (up >= &uxb[UXBSIZE])
                                        goto tunix;
                                *up++ = *fp++;
                        }
                        break;

                case '#':
                        fp = altfile;
                        if (*fp == 0) {
                                uxb[0] = 0;
                                error("No alternate filename@to substitute for #");
                        }
                        goto uexp;

                case '%':
                        fp = savedfile;
                        if (*fp == 0) {
                                uxb[0] = 0;
                                error("No filename@to substitute for %%");
                        }
uexp:
                        printub++;
                        while (*fp) {
                                if (up >= &uxb[UXBSIZE])
                                        goto tunix;
#ifdef  BIT8
                                /* XXX */ /* GR */
                                abort();
#endif
                                *up++ = *fp++ | QUOTE;
                        }
                        break;
                }
                c = getchar();
        } while (c == '"' || c == '|' || !endcmd(c));
        if (c == EOF)
                ungetchar(c);
        *up = 0;
        if (!inopen)
                resetflav();
        if (warn)
                ckaw();
        if (warn && hush == 0 && chng && xchng != chng && value(WARN) && dol > zero) {
                xchng = chng;
                vnfl();
                printf(mesg("[No write]|[No write since last change]"));
                noonl();
                flush();
        } else
                warn = 0;
        if (printub) {
                if (uxb[0] == 0)
                        error("No previous command@to repeat");
                if (inopen) {
                        splitw++;
                        vclean();
                        vgoto(WECHO, 0);
                }
                if (warn)
                        vnfl();
                if (hush == 0)
                        lprintf("!%s", uxb);
                if (inopen && Outchar != termchar) {
                        vclreol();
                        vgoto(WECHO, 0);
                } else
                        putnl();
                flush();
        }
}

/*
 * Do the real work for execution of a shell escape.
 * Mode is like the number passed to open system calls
 * and indicates filtering.  If input is implied, newstdin
 * must have been setup already.
 */
ttymode
unixex(opt, up, newstdin, mode)
        char *opt, *up;
        int newstdin, mode;
{
        int pvec[2];
        ttymode f;

        signal(SIGINT, SIG_IGN);
#ifdef SIGTSTP
        if (dosusp)
                signal(SIGTSTP, SIG_DFL);
#endif
        if (inopen)
                f = setty(normf);
        if ((mode & 1) && pipe(pvec) < 0) {
                /* Newstdin should be io so it will be closed */
                if (inopen)
                        setty(f);
                error("Can't make pipe for filter");
        }
#ifndef VFORK
        pid = fork();
#else
        pid = vfork();
#endif
        if (pid < 0) {
                if (mode & 1) {
                        close(pvec[0]);
                        close(pvec[1]);
                }
                setrupt();
                error("No more processes");
        }
        if (pid == 0) {
                if (mode & 2) {
                        close(0);
                        dup(newstdin);
                        close(newstdin);
                }
                if (mode & 1) {
                        close(pvec[0]);
                        close(1);
                        dup(pvec[1]);
                        if (inopen) {
                                close(2);
                                dup(1);
                        }
                        close(pvec[1]);
                }
                if (io)
                        close(io);
                if (tfile)
                        close(tfile);
#ifndef VMUNIX
                close(erfile);
#endif
                signal(SIGHUP, oldhup);
                signal(SIGQUIT, oldquit);
                if (ruptible)
                        signal(SIGINT, SIG_DFL);
                execl(svalue(SHELL), "sh", opt, up, (char *) 0);
                printf("No %s!\n", svalue(SHELL));
                error(NOSTR);
        }
        if (mode & 1) {
                io = pvec[0];
                close(pvec[1]);
        }
        if (newstdin)
                close(newstdin);
        return (f);
}

/*
 * Wait for the command to complete.
 * F is for restoration of tty mode if from open/visual.
 * C flags suppression of printing.
 */
unixwt(c, f)
        bool c;
        ttymode f;
{

        waitfor();
#ifdef SIGTSTP
        if (dosusp)
                signal(SIGTSTP, onsusp);
#endif
        if (inopen)
                setty(f);
        setrupt();
        if (!inopen && c && hush == 0) {
                printf("!\n");
                flush();
                termreset();
                gettmode();
        }
}

/*
 * Setup a pipeline for the filtration implied by mode
 * which is like a open number.  If input is required to
 * the filter, then a child editor is created to write it.
 * If output is catch it from io which is created by unixex.
 */
filter(mode)
        register int mode;
{
        static int pvec[2];
        ttymode f;      /* mjm: was register */
        register int lines = lineDOL();
        struct stat statb;

        mode++;
        if (mode & 2) {
                signal(SIGINT, SIG_IGN);
                if (pipe(pvec) < 0)
                        error("Can't make pipe");
                pid = fork();
                io = pvec[0];
                if (pid < 0) {
                        setrupt();
                        close(pvec[1]);
                        error("No more processes");
                }
                if (pid == 0) {
                        setrupt();
                        io = pvec[1];
                        close(pvec[0]);
                        putfile(1);
                        exit(0);
                }
                close(pvec[1]);
                io = pvec[0];
                setrupt();
        }
        f = unixex("-c", uxb, (mode & 2) ? pvec[0] : 0, mode);
        if (mode == 3) {
                delete(0);
                addr2 = addr1 - 1;
        }
        if (mode & 1) {
                if(FIXUNDO)
                        undap1 = undap2 = addr2+1;
/* XXX          if (fstat(io, &statb) < 0)
                        bsize = LBSIZE;
                else {
                        bsize = statb.st_blksize;
                        if (bsize <= 0)
                                bsize = LBSIZE;
                }
*/              
                bsize = LBSIZE;

                ignore(append(getfile, addr2));
#ifdef TRACE
                if (trace)
                        vudump("after append in filter");
#endif
        }
        close(io);
        io = -1;
        unixwt(!inopen, f);
        netchHAD(lines);
}

/*
 * Set up to do a recover, getting io to be a pipe from
 * the recover process.
 */
recover()
{
        static int pvec[2];

        if (pipe(pvec) < 0)
                error(" Can't make pipe for recovery");
        pid = fork();
        io = pvec[0];
        if (pid < 0) {
                close(pvec[1]);
                error(" Can't fork to execute recovery");
        }
        if (pid == 0) {
                close(2);
                dup(1);
                close(1);
                dup(pvec[1]);
                close(pvec[1]);
                execl(EXRECOVER, "exrecover", svalue(DIRECTORY), file, (char *) 0);
                close(1);
                dup(2);
                error(" No recovery routine");
        }
        close(pvec[1]);
}

/*
 * Wait for the process (pid an external) to complete.
 */
waitfor()
{
        int stat = 0;

        do {
                rpid = wait(&stat);
                if (rpid == pid)
                        status = stat;
        } while (rpid != -1);
        status = (status >> 8) & 0377;
}

/*
 * The end of a recover operation.  If the process
 * exits non-zero, force not edited; otherwise force
 * a write.
 */
revocer()
{

        waitfor();
        if (pid == rpid && status != 0)
                edited = 0;
        else
                change();
}